Specifications: Lens: 140° wide angle
Encoding format: H.264
Environment: -10 - 50°C
Working humidity: <95%
Signal to noise ratio: =39dB
Sensor: 720p GC1054 CMOS
Video size/frame rate: 720P 15fps
Time alarm response: second of 3-5s
Built-in WIFI: Support for 802.11 B / G / N
Chip set(CPU): GM8135S, ARM CPU core 32bit RISC up to 600MHZ
Recording mode: manual, ringing trigger, motion detection
TF card storage: Maximum 32G storage TF card (not included)
Specifications: Input : 1x VGA 15HDF interface input (Computer/TV Box/PS3 / PS4/DVD Player and other VGA devices) Output: 2-VGA 15HDF (Projectors/TV/Monitors etc) Video bandwidth: 250 MHz Transmission distance :100ft/30m High video resolution: 1920 x 1440 @ 60Hz Compatible with DDC, DDC2, DDC2B ( only Port 1) Support VGA, XGA, SVGA, UXGA, WUXGA and multisync monitors Important Notes: This VGA Splitters can only duplicate images from a computer to two monitors Need to set the same screen resolution,Can not support the different resolution on different screen Recommend use the monitor not more than 19'' Recommend use the vga cable which is 3+6
Specifications: •50ft audio video power cable in black •Be made of pure copper and of good quality •Transmit audio video signal and DC power for security camera. This cable will not support SDI camera and HD camera.
Package Contents: 4x 50ft audio video power cable and free BNC RCA adapters
Resolution Support: Up to 4K@35m (Cat 5e/6) / 40m (Cat 6a); 1080p@60m (Cat 5e/6) / 70m (Cat 6a)
*4K supported:
4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0); 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
Power Supply: VE802R
Connectors: 1 x DC Jack (Black) with locking
Consumption: DC 5V, 4W
VE802T
Connectors: 1 x DC Jack (Black) with locking
Consumption: DC 5V, 3.6W
Feature: The VE802 HDMI HDBaseT-Lite Extender extends an HDBaseT signal up to 70m from the HDBaseT source using one Cat 5e/6/6a cable. VE802 supports RS-232 and IR signaling passthrough, allowing you to control the HDMI source device from the remote unit (VE802R) while also granting access to the HDMI display device from the local unit (VE802T). IR signals can also be extended in both directions. The VE802 features Power over HDBaseT (POH) which can send power over Cat 5e/6/6a cable without an add...