Speed: 1. Fully charge the device. 2. Fill the 350ml water tank. 3. Select one of the 5 cleaning modes. 4. Press the start button. 5. Use the 360-degree rotating nozzle to clean all areas of the mouth, including hard-to-reach areas.
Speed: 1. Fill the detachable 300ml water tank with water. Ensure the tank is securely attached to the device. 2. Select the desired cleaning mode (Low, Medium, High, or Pulse) using the control button. 3. Attach the appropriate tip to the irrigator head. 4. Turn on the device and aim the tip at the area you want to clean. 5. Move the tip slowly along the gum line and between teeth, ensuring all areas are reached. 6. After use, detach the water tank and rinse the irrigator head and tips under running water. 7. Dry the device completely before storing. 8. For optimal results, use the device daily and follow the manufacturer's recommendations for sensitive gums.
Speed: 1. Adjust water pressure by pressing and holding the ON/OFF button until the desired strength is reached. 2. Switch between 4 pressure modes (Strong, Normal, Soft, DIY) to suit your needs. 3. Fill the extra-large 300ml tank with water, ensuring the nozzle is fully inserted for leak-free use. 4. For thorough cleaning, remove the tank and rinse it under running water after each use. 5. The IPX7 waterproof rating allows for easy shower cleaning. 6. The 1500mAh battery lasts up to 45 days on a single charge, and the USB-C cable (included) enables fast charging.
Speed: 1. Remove the oral irrigator from its charging base. 2. Fill the water tank with lukewarm water. 3. Select the desired mode (Soft, Pulse, or Strong) using the mode button. 4. Place the tip in your mouth, pointing at a 90-degree angle towards the gum line. 5. Turn on the device using the power button. 6. Move the tip along the gum line, pausing briefly at each tooth. 7. After use, remove the tip and rinse it under clean water. 8. Store the tip in the built-in storage compartment. 9. Place the oral irrigator back on its charging base to recharge.