


- Triple heat dissipation design, reduce the speed down caused by heat and extend the life of SSD.
- Whether your device is a USB-A or USB-C interface, the included high-speed 2-in-1 USB-C to USB-A and USB-C cable can be perfectly adapted.
- 10Gbps high-speed transmission and greatly shortens the time for transferring files.
- Using high-performance chips. Support UASP, transfer speed increased by 20%. Support TRIM to reduce transmission delay and loss.

The blue LED indicator clearly shows the working status of the M.2 NVME enclosure.

Support hot swap, no need for additional drivers, plug and play.

Automatically activate smart hibernation after 10 minutes of standby to achieve the best performance, which can greatly save power and extend SSD life.

Some applicable brands and models of SSDs:
For Samsung: 970 EVO Plus/970 EVO/970 Pro/960 EVO/950 PRO
For Crucial: P1/P2/P3/P3 Plus/P5/P5 Plus
For Western Digital: WD Blue SN550/ WD_Black SN750/ WD_Black SN850
For Intel: 600P/660P/665P/760P/Optane H10
For Kingston: A2000/KC2000/KC2500
For ADATA: SX8200Pro/XPG SX6000 Lite/S11 Lite
For Seagate:BarraCuda 510/FireCuda 510/FireCuda 520
For Toshiba: RC500/RD500/RC100
For Pioneer: APS-SE20/SE20QN/APS-SE20P/APS-SE10N
If your ssd not included in the list, we are very gladly to help you check if the M.2 enclosure can work with your ssd.
Note: When the first time to use the new SSD, it may not be found, please partition and format it first under disk management, then it can be used normally. If want to work on both Mac and Windows OS, please format it to exFAT.