2PIN-4PIN LED CONTROLLER
WIFI/Bluetooth/IR/RF/PWM LED Controller
Working Voltage: DC5V/DC12V/DC24V
Only Indoor Use
RGBZONE is committed to continuous product innovation to provide personalized life experience. We are experts in LED Controller. Our products are of high quality and bring you a more comfortable life. According to your suggestions, we will continue to improve and optimize our products to provide you with better choices.
RGBZONE RF LED Controller
RGBZONE LED Controller
5V USB Switch Extension Cable
RGBZONE LED Dimmer
RGBZONE LED Panel Dimmer
RGBZONE LED Controller
RGBZONE LED Dimmer
Dream Color LED Controller
RGBZONR LED Controller
Motion Sensor Detector Switch
RGBZONERGB LED controller is designed to drive constant voltage LED products in voltage range of DC 5-24 V. The main unit works with a RF remote controller, user can setup LED brightness and dynamic modes on the remote controller.
Specification about 17 Key RF Remote LED Controller
RGBZONE multi-colour and mode-change 17-key MINI RGB controller
- ***Input Voltage=Output Voltage. e.g. DC 12V 5050 LED strip must use DC 12V power supply, do not use 5V power supply.
- The power is 5V < 0W, 12V < 72W, 24V < 144W, if it exceeds this power, please equip the light strip with a separate power supply or use it with an amplifier.
Application:
Controller remote can be used to install led tape lighting, under cabinet lighting, Car led lighting, Indirect lighting in crown molding, Tv Back light, and use about anywhere you would like to install your strip light decoration.
Why does the remote control not work?
First of all, check whether you have removed the plastic spacer at the bottom of the remote control before using it (the plastic spacer isolates the battery power).
Whether the power supply is included?
Power supply/adapter/plug is not included in the package. Please choose a power supply with the same voltage as the original power supply.
Why the light strip is slightly bright or only red light up?
Reason: incorrect voltage use, please keep in mind: Input voltage=output voltage (the use of voltage depends on the light bar you use)
If the lighting effect is stuck, or the end of the LED strip gradually darkened to do?
Please add voltage to the LED strip in time. This is a normal physical phenomenon, and all the LED strips cannot avoid this problem.
What to do when your controller is connected to the light bar and the light appears to flicker?
Please do not worry, may be your light bar, the controller and the power supply between the three connection problems, the situation is varied, you can contact our , accompanied by your connection to the light bar model and photo!
RGBZONE RF LED Controller Choose
 RF LED Controller |  RF LED Controller |  RF LED Controller |  RF LED Controller |  RF LED Controller |  RF LED Controller | |
|---|---|---|---|---|---|---|
Customer Reviews | — | — | — | — | — | — |
Price | — | — | — | — | — | — |
Connection Method | RF Remote Control | RF Remote Control | RF Remote Control | RF Remote Control | RF Remote Control | RF Remote Control |
Output Current | 3x2A | 3x2A | 3x2A | 3x2A | 3x2A | 3x2A |
Output Power | 5V<30W, 12V<72W, 24V<144W | 5V<30W, 12V<72W, 24V<144W | 5V<30W | 5V<30W | 5V<30W, 12V<72W, 24V<144W | 5V<30W, 12V<72W, 24V<144W |
Remote Control Distance | 32-98FT(10-30M) | 32-98FT(10-30M) | 32-98FT(10-30M) | 32-98FT(10-30M) | 32-98FT(10-30M) | 32-98FT(10-30M) |
Light Strip Type | 5050 3528 5630(RGB) | ws2812 ws2812b ws2811 | ws2812 ws2812b ws2811 | ws2812 ws2812b ws2811 | ws2812 ws2812b ws2811 | 5050 3528 5630(RGB) |
Connector type | 4Pin & DC | 3Pin & DC | 3Pin & USB | 4Pin & USB | DC | 4Pin & DC |
RGBZONERGB LED controller is designed to drive constant voltage LED products in voltage range of DC 5-24 V. The main unit works with a RF remote controller, user can setup LED brightness and dynamic modes on the remote controller.
Specification about 17 Key RF Remote LED Controller
| Type | 17 Key RF LED Controller |
|---|---|
| Supply Voltage | 5V/12V/24V (Wide Voltage) |
| Static Power Consumption | <1W |
| Maximum Load Current | < 12A( 3 Channels) |
| Connection Mode | Common Anode(+) |
| Power | 5V 30W 12V72W 24V144 W |
| Working Temperature | -4 to 140 ? (-20 to 60° ) |
| Dimension | L1.6 * W0.5 *H 0.2 Inch |
| Package Included | 1 X Mini 17 Keys RF Wireless Remote Controller (CR2025 Button Battery) |
RGBZONE multi-colour and mode-change 17-key MINI RGB controller
- ***Input Voltage=Output Voltage. e.g. DC 12V 5050 LED strip must use DC 12V power supply, do not use 5V power supply.
- The power is 5V < 0W, 12V < 72W, 24V < 144W, if it exceeds this power, please equip the light strip with a separate power supply or use it with an amplifier.
Application:
Controller remote can be used to install led tape lighting, under cabinet lighting, Car led lighting, Indirect lighting in crown molding, Tv Back light, and use about anywhere you would like to install your strip light decoration.
Why does the remote control not work?
First of all, check whether you have removed the plastic spacer at the bottom of the remote control before using it (the plastic spacer isolates the battery power).
Whether the power supply is included?
Power supply/adapter/plug is not included in the package. Please choose a power supply with the same voltage as the original power supply.
Why the light strip is slightly bright or only red light up?
Reason: incorrect voltage use, please keep in mind: Input voltage=output voltage (the use of voltage depends on the light bar you use)
If the lighting effect is stuck, or the end of the LED strip gradually darkened to do?
Please add voltage to the LED strip in time. This is a normal physical phenomenon, and all the LED strips cannot avoid this problem.
What to do when your controller is connected to the light bar and the light appears to flicker?
Please do not worry, may be your light bar, the controller and the power supply between the three connection problems, the situation is varied, you can contact our , accompanied by your connection to the light bar model and photo!
RGBZONE RF LED Controller Choose
RF LED Controller | RF LED Controller | RF LED Controller | RF LED Controller | RF LED Controller | RF LED Controller |
|---|---|---|---|---|---|
| Customer Reviews | |||||
| — | — | — | — | — | — |
| Price | |||||
| — | — | — | — | — | — |
| Connection Method | |||||
| RF Remote Control | RF Remote Control | RF Remote Control | RF Remote Control | RF Remote Control | RF Remote Control |
| Output Current | |||||
| 3x2A | 3x2A | 3x2A | 3x2A | 3x2A | 3x2A |
| Output Power | |||||
| 5V<30W, 12V<72W, 24V<144W | 5V<30W, 12V<72W, 24V<144W | 5V<30W | 5V<30W | 5V<30W, 12V<72W, 24V<144W | 5V<30W, 12V<72W, 24V<144W |
| Remote Control Distance | |||||
| 32-98FT(10-30M) | 32-98FT(10-30M) | 32-98FT(10-30M) | 32-98FT(10-30M) | 32-98FT(10-30M) | 32-98FT(10-30M) |
| Light Strip Type | |||||
| 5050 3528 5630(RGB) | ws2812 ws2812b ws2811 | ws2812 ws2812b ws2811 | ws2812 ws2812b ws2811 | ws2812 ws2812b ws2811 | 5050 3528 5630(RGB) |
| Connector type | |||||
| 4Pin & DC | 3Pin & DC | 3Pin & USB | 4Pin & USB | DC | 4Pin & DC |
2PIN-4PIN LED CONTROLLER
WIFI/Bluetooth/IR/RF/PWM LED Controller
Working Voltage: DC5V/DC12V/DC24V
Only Indoor Use
RGBZONE is committed to continuous product innovation to provide personalized life experience. We are experts in LED Controller. Our products are of high quality and bring you a more comfortable life. According to your suggestions, we will continue to improve and optimize our products to provide you with better choices.
RGBZONE RF LED Controller
RGBZONE LED Controller
5V USB Switch Extension Cable
RGBZONE LED Dimmer
RGBZONE LED Panel Dimmer
RGBZONE LED Controller
RGBZONE LED Dimmer
Dream Color LED Controller
RGBZONR LED Controller
Motion Sensor Detector Switch