Question 1

Would this mount support a 27" AOC monitor Model # e2752Vh Would like to free up some desk space and the AOC web site says a vesa 100mm mount is required and that is what this is?

Accepted Answer

It should work just fine.

The manufacturer states 13" to 24" to be on the safe side as far as weight is concerned.  As long as the monitor does not exceed the 44lbs spec and both the mount and monitor are VESA (75 or 100mm) there should not be any problem.

Question 2

I have 23" TV I want to mount into stone. Will this mount work for that? In addition, can this design be put in a corner space as well as flat wall?

Accepted Answer

It really depends on the "stone" you're mounting to.  It has to be flat and free of big mortar joints.  Sandstone or limestone and the like will not work well since it crumbles.  A dense poured concrete wall works best but you can get away with mounting on a concrete block wall as well.  Just remember -- you're going to need a special masonry bit for your drill -- a regular wood bit will not work and is actually dangerous since it can break and splinter into shrapnel if used on rock.  Either way you must wear safety glasses or goggles.

This mount will not work in a corner.

Question 3

What is the mounting pattern on the wall attachment?  How far apart are the holes and what is the overall measurement of the wall mounted faceplate?

Tks-ACE

Accepted Answer

This severed  it's purpose for my 22in Hanns-G. I did the best I could with A ruler. 3 inches for the inside holes, 4 inches for the outside holes, that is center to center. the overall size is 4 3/4 inches as you can see in the pic. I do believe it comes with some round spacers also, about 3/4 inch round. Hope this helped you out.

Questions & Answers