This item is currently out of stock and it may or may not be restocked.

Are you an E-Blast Insider?

SNT SNT-SAC2131TL 3x3.5" Hard drive in 2x5.25" Bay SAS/SATA Trayless Backplane Hot Swap RAID Cage

The SNT-SAC2131TL is a high capacity tray-less backplane RAID cage for both SAS and SATA. It is a 3 x 3.5” hard drive in 2 x 5.25” bay backplane raid cage that supports up to 6TB in total. It transfers up to 3Gbps for SAS & SATA-II and 1.5Gbps for SATA-l. It’s designed to support RAID Level 0, 1, 5.
Created with aluminum, protected by plastic at the front and supported by 50mm cooling fan at the back, the SNT-SAC2131TL will stay cool. The mechanical slide lock is also designed to further protect your storage hardware. It has hot-swap ability and requires no software installations.
  • neweggProtectionThe SNT-SAC2131TL has super air ventilation and excellent heat sink. Made with aluminum and with a 50mm cooling fan supporting at the back panel, the system stays cool. In addition, mechanical slide lock is designed to protect any physical impact from the outside.
  • neweggStorage CapacityThe SNT-SAC2131TL can support up to 6TB in total. Each bay has a capacity up to 2TB. Most 3.5” hard drives will do fine with SNT-SAC2131TL. It is compatible for both SAS and SATA hard drives. With its hot-swap function, you will have an easy time storing and swapping your data on a daily basis.
  • neweggEasy SetupThe setup procedure is simple and easy. Simply put the SNT-SAC2131TL into your 5.25” slots, connect them with SATA cables and you’re ready to use this amazing product. You do not need to install any software or drivers.

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies

Manufacturer Contact Info