StarTech Multi-Gigabit Media Converters MCM10GSFP2

The StarTech MCM10GSFP2 is a 10GbE media converter that connects RJ-45 Ethernet at 10G, 5G, 2.5G, 1G, or 100M to a 10GBASE-X SFP+ fiber link, making it suitable for network administrators upgrading copper connections to fiber.

Recommended For

• Network administrators extending a 10GbE RJ-45 connection over fiber between a server room, wiring closet, or remote network location.
• IT teams upgrading a copper-based 10GbE link to single-mode or multimode fiber while choosing the SFP+ transceiver to match their link.
• Installers fitting a single copper-to-fiber link into a wiring closet, server room, or edge location where standalone, wall, DIN-rail, or chassis mounting is useful.
• Teams deploying a fixed 10GbE link that need support for jumbo frames up to 16K and full-duplex flow control.

Real-World Use Scenarios

• When a network closet or remote room has a copper Ethernet device but the network connection needs to continue over fiber, use the converter between the device and a fiber link; this bridges the copper-to-fiber connection without replacing the endpoint with fiber hardware.
• To connect equipment across a longer building or campus link, pair the converter with a compatible SFP+ transceiver and fiber cable; the fiber segment can carry the network connection farther than a typical copper Ethernet run, with reach depending on the selected transceiver and fiber.
• When adding fiber to an existing wiring closet or server-room setup, use the converter at the copper-connected device rather than replacing that device; it provides a way to join the existing Ethernet connection to a 10GBASE-X fiber network.
• In a distributed network installation with limited rack space, mount the converter near the copper device or fiber handoff using a wall or DIN-rail setup; this keeps the copper-to-fiber connection close to where it is needed.
• When connecting a 2.5G or 5G copper device to a fiber network, use the converter to bridge the copper and 10GBASE-X sides; the experience depends on the negotiated copper link, so the converter does not make the endpoint itself operate at 10Gbps.

Spec Summary