



















The Kryonaut thermal paste was specially developed for the extremely demanding applications and the highest demands of the overlocking community. Kryonaut is also recommended as a top product for critical cooling systems in the industrial sector.
Especially for overclocking
Excellent thermal conductivity
No curing
High long-term stability
Not electrically conductive
"Kryo" - the Greek word for "cold", which is also used in cryogenics - indicates that theKEY_TAB Kryonaut thermal paste is especially suitable for use in the low temperature range - it was developed for the true "Kryonauts" among the "Extreme Overclockers"."Kryo" - the Greek word for "cold", which is also used in cryogenics - indicates that theKEY_TAB Kryonaut thermal paste is especially suitable for use in the low temperature range - it was developed for the true "Kryonauts" among the "Extreme Overclockers".
KryonautKEY_TAB uses a special carrier structure, which does not begin any drying processes even at 80 ° C. This carrier structure ensures that the nano-aluminum and zinc oxide components contained in the paste combine optimally, thus optimally compensating for unevenness in the heat transfer medium (e.g. the CPU) and a heat sink (e.g. heat sink) with excellent thermal conductivity.
Thermal conductivity 12.5 W / mk
Thermal resistance 0.0032 K / W
Electrical conductivity * 0 pS / m
Viscosity 120-170 Pasdensity 3.7g / cm3
Temperature -250 ° C / +350 ° C
ContentKEY_TAB 11.1g
Model: TG-K-030-R
Pros: It cools, and does it well. I use a FX-8320 overclocked to 4.5Ghz. I was running low on the paste Be Quiet! sent with their Dark Rock Pro 3 and I was curious how a high end thermal paste would compare to whatever the no-name stuff I already had on hand. Using a Prime95 small FFT test of 10 minutes where the teamperature sort of plateaus, this Kryonaut paste dropped my temperatures almost 8 degrees Celcius, which allowed me to go from 4.4 Ghz previously to the 4.5 Ghz I have used for the last month.
Cons: It's a bit on the expensive side of paste
Overall Review: After the first application, about a month later, I needed to take my heatsink off. This paste does get to be sticky. It almost supported the entire weight of my Dark Rock Pro 3, which weighs around two pounds. It can make removal of the cooler more... Interesting than I would like.