Question 1

can i plug another switch into this switch if i run out of ports?

Accepted Answer

It depends on how many switches are before it.  I think the limit is 3 or 4 cascaded, but if you have only one other switch between this switch and the router, then yes.  But it's best to buy a switch with enough capacity to meet future needs.  The cost of additional ports won't be as much as buying two switches, plus you'll lose two ports to connect the switches to each other.

For example, if you buy a 16-port switch you get 15 ports after connecting it to your router.  But if you buy 2 8-port switches, you only get 13 ports because there will be 6 useful ports on the 1st switch after connecting it to the router and the 2nd switch, and only 7 ports left on the 2nd switch after connecting it to the 1st switch.

Question 2

Is there a particular port you have to hook the router to, or will any one of the eight do ?

Accepted Answer

Any one will do.  I have to put the router cord into port 1 because of OCD though.

Question 3

I bought a switch before and discovered that it was simply for connecting computers together. The additional computers did NOT get the Internet. Assuming this switch is connected to my cable modem, will all remaining ports deliver Internet signal?

Accepted Answer

No. You need a router to specifically handle the internet connection. Routers are used to bridge two different networks (the internet is one network and your home is the other). A switch is only meant to handle connections between computers/devices on the same network. Most routers have switches built into them, which is where a lot of the confusion comes from. I bought this switch to extend a friend's home network. She already had a router to handle splitting the internet to different devices in her home, but she only had one cable running to her living room. I put the switch in the living room so she could have all her devices (game consoles, Apple TV, Blue-ray, TV) connected to her router at the same time.

Question 4

Does this have mounting points, so I can mount it inside my home network cabinet?

Accepted Answer

Yes, there are two mounting holes that have slots oriented so that it can be mounted horizontally or vertically.

Question 5

I have reviewed the answers but remain uncertain. With a Verizon FIOS Quantum Gateway router connected to this 8-port gigabit switch, via a Cat5e cable, allow several computers, also connected to this switch, have internet access? The router has one WAN port and four LAN ports. The router is located in a different room from the computers with only one Cat5e cable run between the rooms. Thanks for any clarification.

Accepted Answer

This switch will work with your setup.  Because it uses a wire to communicate, there is no problem with having the router in one room and the switch and computers in another room.  The switch itself just provides a path for all devices plugged into the switch to communicate with each other.  But the router and computers must be properly configured or they cannot communicate with each other, whether they are connected by the switch or even a direct connection.  In fact, you can test that the communications are working by connecting individual computers directly to the router.  If they work when directly connected to the router, they will work with the switch.  DHCP is the simplest configuration for making this communication work.  Both the router and the connected computers must be configured to use DHCP.  Most routers and computers are set up to use DHCP by default, so if things don't work, you should check the router and the computers to be sure they are using DHCP.  You need to check the router and computer operating system manuals for instructions if you need to configure them for DHCP.

Question 6

I think the answer is yes, but are the led's on the front distinguish between gigabit devices and 10/100 devices?

Accepted Answer

Yes.  Amber for 10/100, green for 1000.

Question 7

which would be faster, one 16port 10/100 switch, or two 8port 10/100/1000 switches?

Accepted Answer

It would depend on your needs.  Technically a gigabit switch will be faster than a 10/100, so technically two 8 port gigabit switches would be faster.  Typical internet does not move at gigabit speeds so it is kind of pointless if that is all you do.  But if you have a NAS or other network media, then go gigabit.

Question 8

Will this work with internet ready devices: tv, bluray player, wd media player, etc?

Accepted Answer

It will work with any device that has an Ethernet port.

Question 9

Can I put this switch in another room (living room) with my wired through the wall connection? 
Can I run 5 devices (TV, TIVO box, Fire TV box, Blue Ray and DVD player)in the living room when the switch is connected in my office room to a single port on my modem/router?
Will it affect the other 3 ports on my modem/router?

Accepted Answer

Q:"Can I put this switch in another room (living room) with my wired through the wall connection?"
A:Yes
Q:"Can I run 5 devices (TV, TIVO box, Fire TV box, Blue Ray and DVD player)in the living room when the switch is connected in my office room to a single port on my modem/router?"
A:Yes as long as they all have Ethernet connectors.
Q:"Will it affect the other 3 ports on my modem/router?"
A:The only effect will be slightly slower speeds due to the added bandwidth usage.
Conclusion: I have never had a blueray or dvd player with an Ethernet connection. make sure these are networkable devices.

Question 10

setting a wired network at home primarily for gaming / streaming/ surfing, i narrowed down a router considering we have about 10 systems that stretch between 2 rooms will one of these in each room be sufficent to accomondate the  load?

Accepted Answer

The brunt of the load's going to be through your router. I'd be more worried about that than the switch. As for this switch, it will run quickly a efficiently in your set-up.

Brand	TP-Link
Model	TL-SG108

Format	Desktop
Standards	IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x
Network Management Type	Unmanaged

Uplink Ports	None
Primary Ports	8 x RJ45
Primary Port Speed	10/100/1000Mbps

Switching Method	Store and Forward
Jumbo Frames	Yes

Protocols	CSMA/CD
PoE	No
QoS	Yes
Layer	Layer 2 Only
LEDs	System Power Link, Speed and activity indicators per port built into each RJ-45 port

Best Sellers

Meet Your Seller

TP-Link 8 Port Gigabit Ethernet Network Switch | Ethernet Splitter | Sturdy Metal w/ Shielded Ports | Plug-and-Play | Traffic Optimization | Unmanaged (TL-SG108)

Learn more about the TP-Link TL-SG108

Customer Reviews of the TP-Link TL-SG108

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Temperature	0°C to 40°C (32°F to 104°F)
Humidity	10% - 90%, Non-condensing

Dimensions & Weight
Dimensions	1.00" x 6.20" x 4.00" (H x W x D)
Weight	1.10 lbs.

Item#: 9SIC1TXKKR2677