here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
Best Sellers
Hot Seller- $161.12
- + FREE SHIPPING
- $162.67
- + FREE SHIPPING
Tripp Lite N784-H01-SCMM Hardened Copper to Fiber Media Converter - 10/100 Mbps, RJ45/SC Multimode, -10 to 60°C, 2km (1.2 mi) 10 Mbps; 100 Mbps RJ45 (FEMALE); SC DUPLEX (FEMALE)
- 10 Mbps; 100 Mbps
- RJ45 (FEMALE); SC DUPLEX (FEMALE)
+
+
Learn more about the Tripp Lite N784-H01-SCMM
| Brand | Tripp Lite |
|---|---|
| Model | N784-H01-SCMM |
| Device Type | Converter |
|---|---|
| Media Conversion | Fiber to Ethernet |
| Standards | IEEE802.3, IEEE 802.3u |
| Wavelength | 1310nm |
| Ports | RJ45 (FEMALE); SC DUPLEX (FEMALE) |
| Max Distance | 2 km |
| Transfer Rate | 10 Mbps; 100 Mbps |
| LEDs | PWR(Power LED), ALM (LFS function indicator), Fiber - 100 (For Ethernet speed 100Mbps), LNK/ACT (Fiber port data transmitting/receiving), RJ45 - 100 (For RJ45 speed 10/100Mbps), LNK/ACT (For Copper port data transmitting/receiving) |
| Power Adapter | Input: 100-240V, 50/60Hz, 0.5A; Output: 12V, 1.5A |
| Temperature | Operating Temperature Range: 14 to 140F (-10 to 60C) Storage Temperature Range: -40 to 185F (-40 to 85C) |
|---|---|
| Humidity | 5% to 95% RH, Non Condensing |
| Feature | Extends a Network Connection up to 2 km over SC Multimode Fiber Optic Cable This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Link Fault Signaling and Loop Back Functions Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. Protective Metal Housing Built to Withstand a Variety of Hazards The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting. Works in Tandem with Tripp Lite's N785-CH12 Chassis House and power up to 12 Tripp Lite media converters, including the N784-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation. TAA-Compliant for GSA Schedule Purchases |
|---|
| Dimensions | 0.92" x 2.91" x 4.30" |
|---|---|
| Weight | 0.53 lb. |
| Package Contents | N784-H01-SCMM Media Converter L-shaped bracket Rubber foot SC connector cap External power supply with NEMA 1-15P plug (Input: 100–240VAC, 50/60 Hz, 0.5A; Output: 12VDC 1.5A) DIN rail kit Wall-mounting hardware Quick Start Guide |
|---|
| First Listed on Newegg | July 21, 2022 |
|---|
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Limited Warranty period (parts): 3 years
- Limited Warranty period (labor): 3 years
- Read full details
Return Policies
- Return for refund until: January 31, 2027
- Return for replacement until: January 31, 2027
- This item is covered by Newegg.com's Extended Holiday Return Policy.
- Read full return policy for details.
We want to ensure your holiday shopping this year is hassle-free. That’s why we’re automatically extending our return policies on almost every product! For purchases placed between November 1st, 2026 and December 31, 2026 you will have until January 31, 2027 to return your product.
Manufacturer Contact Info
- Manufacturer Product Page
- Manufacturer Website
- Support Phone: 773-869-1234
- Support Website
- View other products from Tripp Lite
LOADING...
LOADING...
The Tripp Lite N784-H01-SCMM is a hardened 10/100 Mbps copper-to-multimode-fiber media converter for network installers extending Ethernet connections up to 2 km over duplex SC fiber, with auto-negotiation and Link Fault Signaling for connection monitoring.
Recommended For
- Network installers extending a 10/100 Mbps Ethernet link beyond copper’s typical 100-meter reach to a switch, hub, or other network device over SC multimode fiber, up to 2 km.
- Industrial or remote-site installers who need a wall- or DIN-rail-mounted converter rated for operation from -10°C to 60°C.
- Technicians commissioning or troubleshooting a fiber link who want link-fault signaling, status LEDs, and local or remote loopback tests.
- Facilities or network teams buying equipment for eligible federal procurement who need a TAA-compliant converter for a 10/100 Mbps SC multimode connection.
Real-World Use Scenarios
- Connect a 10/100 Ethernet device in a remote building or cabinet to the main network over existing SC multimode fiber. With a compatible fiber connection at the other end, it can extend the link up to 2 km without relying on a long copper run.
- Reuse an installed multimode fiber run to connect a legacy 10/100 switch or network device that lacks a fiber port. The converter provides a copper RJ45 handoff, while the link remains limited to the device’s supported 10/100 Mbps speeds.
- Carry network traffic to a remote 10/100 camera or access-control device over fiber when it is too far from the network closet for a copper Ethernet run. The endpoint and converter need local power: this model does not provide Power over Ethernet.
- Install a 10/100 network connection near industrial equipment in a cabinet or other location within the unit’s rated operating-temperature range. Its included DIN-rail hardware supports cabinet mounting; the rating does not mean the converter is weatherproof.
- Check a new or faulty copper-to-fiber installation by using the converter’s local and remote loopback tests and link-fault indicator. These help an installer identify whether the copper segment, fiber segment, or link itself needs attention.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | Extending a 10/100 Mbps Ethernet connection between copper and SC multimode fiber network devices over distances up to 2 km |
| Network Conversion And Standards | Converts fiber to Ethernet and supports IEEE 802.3 and IEEE 802.3u, with 10 Mbps and 100 Mbps transfer rates |
| Fiber Link | SC duplex multimode fiber connection with a 1310 nm wavelength and a maximum reach of 2 km |
| Copper And Fiber Ports | Female RJ45 copper port and female SC duplex fiber port |
| Installation And Diagnostics | Auto-negotiation and automatic MDI/MDI-X configuration support device connections; Link Fault Signaling and local and remote loopback functions help check link status and cable installation |
| Status Indicators | LEDs indicate power, link/activity, Ethernet speed, and link-fault status for the copper and fiber connections |
| Power | Included adapter accepts 100–240 V AC at 50/60 Hz, 0.5 A and supplies 12 V DC at 1.5 A |
| Environmental Conditions | Operating temperature: -10 to 60°C; storage temperature: -40 to 85°C; humidity: 5% to 95% RH, non-condensing |
| Housing And Mounting | Hardened aluminum housing with ESD, RFI, and surge protection; wall-mounting hardware and DIN rail kit included |
| Chassis Compatibility | Can be housed and powered in the Tripp Lite N785-CH12 12-port media converter chassis, sold separately |
| Compliance | TAA-compliant |
| Dimensions And Weight | 0.92 × 2.91 × 4.30 in; 0.53 lb |
| Model Identifiers | Tripp Lite N784-H01-SCMM |