Pros: Solid plastic construction. Easy to install. Comes with 8 screws. Matches the plastic of my Corsair 550D and looks great. No flex or misshaped odd parts. Newegg shipping rocks, The sun is out. Now I can use my card reader

Cons: I have nothing

Overall Review: I simple addition to utilize my 3,5 card reader in my new case

Pros: It's a drive tray. When mounting 2 drives you can install them facing the same direction or opposite directions to avoid cabling issues. I use straight-in SATA cables, but if you have the drive on top connected with a right-angle SATA cable then simply have the lower drive face the other way so its connector isn't blocked by the right-angle cable of the drive above. Bottom of tray has a large round cutout which helps airflow around the drive or drives.

Cons: Not exactly a con, but it's useful to know that the mounting screws are intended to bite into the small plastic mounting holes to ensure a snug fit.

Overall Review: Clearly this little bracket is up to the job of holding 2 laptop size drives without problems. Also, it will fit into the hard drive tray of a Lenovo small form factor PC. Should also fit other brands of PC since the location of hard drive mounting holes is standardised .

Pros: It works, with a tweak on some cases.

Cons: Had to drill my own holes for a case the ones on it didn't match up. But it does do what it is intended to do.

Overall Review: One egg off just for the fact I had to make my own holes for a case. Other then that it works well.

Pros: can use a 3.5" device in a 5.25" bay. works perfect with the VANTEC UGT-IH203 2-Port USB 3.0 Front Panel. for less than $20 have 2 more, more accessible USB 3.0 ports on the front.

Cons: doesn't match my 600T Graphite's texture or shade of black. is a little bit too flexible plastic.

Overall Review: does match my dvd drives' colors and textures so it does sort of match.

Pros: Very sturdy, many mounting points, good finish on the product, looks good in a black case.

Cons: None

Pros: Good quality. Nice and solid. Definitely not going to break or anything of the sort.

Cons: Uses M3 threads for the 3.5" side. The industry standard for 3.5" hard drives is 6-32 threading. This is an issue for high end cases like Lian-Li. I've got a Lian-Li case which has a hard drive caddy which uses special screws (they're rubber padded for vibration). The screws are 6-32, meaning they won't fit this adapter. Making the adapter completely useless.

Pros: Made of metal with textured finish., not junky sheet metal with sharp edges. Kit includes small screws to mount your SSD to the plate.

Cons: The side mounting holes (3-per-side) are tapped with metric-sized threads. The kit includes screws with the proper size/threads but I use mounting rails from Dell that have special length screws that are 6-32 threaded. Fortunately the size of the holes are just about the same size as 6-32. I was able to use a 6-32 tap to modify the threads to accommodate the mounting rails I use.

Overall Review: I had a tapping tool to modify my project and make it useful. If I was the average computer owner/builder expecting to mount an SSD and get it into a computer I would be plenty ticked when I discovered that the mounting holes were not usable.

Pros: I have a CoolerMaster HAF XB case and wanted to put my 2TB WD Black drive in one of the 5.25 bays. The hot swap bays were already taken up. I bought this and popped off the front bezel. Attached the drive by screwing in from bottom of holder, then slid into the case. Locked in place nicely, and was able to put original slot cover back on. Worked great!

Cons: None. Basic product, did what I wanted.

Overall Review: Recommended for anyone else with CoolerMaster HAF XB. Other solutions will probably work just as well, but this one is confirmed!