Wet Sounds RF RGB Music Controller w/Touch Activated Remote

Take control of your Wet Sounds LED speakers with the RF RGB Music Controller w/ Touch Activated Remote. With the Wet Sounds RF-RGB-MC V2 you can run up to 10 meters (38ft.) of led strips without a doubt. This handy remote controls your LED speakers using the most advanced PWM (pulse width modulation) remote control technology. You can choose your favorite accent color, or explore five multi-light color change modes or three music modes you can set the mood or set the lights to react to the beat of the music. All in all, you'll find thousands of different color combinations available.




Features -

Power: on

Power: off

Color Wheel: choose color with touch sensitive color wheel

Brightness: rocker switch

Speed: rocker switch; change the speed at which the colors change in multi-color mode



Multi-Color: rocker switch; change between the six color modes -

Mode 1: static mode (not blinking); choose one of the seven colors (white, cyan, purple, yellow, blue, green, or red)

Mode 2: blinks (sharply) between all seven colors

Mode 3: fades gradually between red, green, and blue

Mode 4: fades gradually between all seven colors

Mode 5: single color blink; choose one of the seven colors

Mode 6: two color blink; choose blue and green, blue and red, or red and green



Music: rocker switch; change between the five music control modes; each varies with the beat of the music connected to the line input

Mode 1: choose any one of the seven colors to blink (sharply) with the music (white, cyan, purple, yellow, blue, green, or red)

Mode 2: quickly fades between all seven colors

Mode 3: gradual fading between all seven colors

Mode 4: red hopping, green hopping, or blue hopping

Mode 5: two color mix; choose blue and green, blue and red, or red and green



Sensitivity: rotary knob on receiver unit; adjusts sensitivity to the music input



Connections (receiver):

Power/Ground: the removable set screw terminal accepts power and ground wires up to 14-gauge

RGB Output: there are two removable RGB output set screw terminals; each accepts bare wire up to 14-gauge

Line Input: the 3.5mm stereo mini-jack input allows integrating the lights with the beat of the music