Question 1

Does it come with any filament?

Accepted Answer

Yes.  Normally they come with Red and Natural (off-white), but my package also came with 3 other colors too (but I think that was a promo thing)

Question 2

Does this device do 3D scanning as well?

Accepted Answer

No, it is a dual extruder printer. It can print using two colors, which is a unique feature, but it does not scan anything.

Question 3

how big is the box where it comes?

Accepted Answer

I don't have the exact measurement so but I'd say a 3 ft x 3ft x 3 ft cube! I have a Honda civic and it fit in the front passenger seat, if that gives you a perspective!

Question 4

Specs say this is ABS/PLA compatible, but I don't see PLA available for this printer from XYZ. Is it in the works? When is it going to be available?

Accepted Answer

XYZprinting is supposed to be making PLA filament available for the printer, but I haven't seen it yet. The printer is a great buy, and I hope  they can make PLA work. I'm told the PLA swells when heated, and the nozzles may be problematic with this.
All in all, a great printer, I use it almost daily.

Question 5

I want to print something 7.8 inches diameter and less than 1 inch high (and two colors).  Based on the build dimensions it looks like it could be built in the Duo, but would have to be done sideways, which would create support issues, I think.  Can you clarify?

Accepted Answer

Hello.

This printer does have the ability to do this. Here is what I have learned, say you are going to print a 7.8 inch diameter ring 1 inch tall, you would have to print it on its side with supports. XYZware has the support algorithm built into it and it does quite well. It will automatically fill in all space around an objects footing with some sort of material. This supports the object being printed, but does not better the print quality. If you were to print this on its side, you would find that at the top and base of the print, you would get layer overhang, which can be rough and if calibration is off a bit, the abs can "glob out". The middle of the print would be nice and smooth.

Another note is the two color part. At the moment XYZ has not developed a way to tell the printer what sections of a single object to print in one of two colors. It's either all one color or all the other color. If you want two colors in a item that you created, you need to design the part as two separate .stl files, one for one color sections and the other for the other color sections. You then will import both of them into the software and align them. Once they are aligned the printer will do the rest and your end product will be two colors.

Hope this helps

Question 6

Does this print in ABS, PLA, or both?

Accepted Answer

ABS. XYZprinting sells proprietary cartridges - see http://www.newegg.com/Product/Product.aspx?Item=9SIA5HC1SZ5175&cm_re=xyzprinting_filament-_-28-840-003-_-Product

Question 7

the power cord, you can get it for France and the menu in French?

Accepted Answer

Hello,

Thank you for contacting us in regards to your question.

The best way to confirm specs is actually by checking the manufacturer's website (that's where we get them). Click on the Specifications tab on the item page, and look in the Quick Info box on the bottom of the page. You'll find a link to the item on the manufacturer's own site with the most up-to-date details.

Thank you, 
Newegg Support


	da Vinci Jr. 1.0	da Vinci Jr. 1.0w	da Vinci Jr. 1.0 3-in-1	da Vinci 1.0	da Vinci 1.0 Pro	da Vinci 1.0 Pro 3-in-1	da Vinci 2.0 Duo
Printer Weight(lbs)	26.4 lbs	26.4 lbs	33.07 lbs	55 lbs	58.6 lbs	60.63 lbs	60.6 lbs
Shipping Dimensions (ln)	21.53 x 22.87 x 18.7 inch	21.53 x 22.87 x 18.7 inch	21.53 x 22.87 x 18.7 inch	22.1 x 27.6 x 23.3 inch	22.1 x 27.6 x 23.3 inch	22.1 x 23.3 x 27.6 inch	22.1 x 27.6 x 23.3 inch
Filament Material	Jr. PLA Filament	Jr. PLA Filament	Jr. PLA Filament	ABS/PLA Filament	ABS/PLA Filament	ABS/PLA Filament	ABS/PLA Filament
Filament Diameter	1.75 mm	1.75 mm	1.75 mm	1.75 mm	1.75 mm	1.75mm	1.75 mm
Maximum Build Volume	5.9 x 5.9 x 5.9 inches	5.9 x 5.9 x 5.9 inches	5.9 x 5.9 x 5.9 inch	7.8x7.8x7.8 inches	7.8 x 7.8 x 7.8 inches	5.9x7.8x7.8 inches	5.9x7.8x7.8 inches
Layer Thickness(Resolution)	Fine 0.1 mm (100 microns) Standard 0.2 mm (200 microns) Speed 0.3 mm (300 microns) Ultra Fast 0.4 mm (400 microns)	Fine 0.1 mm (100 microns) Standard 0.2 mm (200 microns) Speed 0.3 mm (300 microns) Ultra Fast 0.4 mm (400 microns)	Fine 0.1 mm (100 microns) Standard 0.2 mm (200 microns) Speed 0.3 mm (300 microns) Ultra Fast 0.4 mm (400 microns)	Fine 0.1 mm (100 microns) Standard 0.2 mm (200 microns) Speed 0.3 mm (300 microns) Ultra Fast 0.4 mm (400 microns)	Fine 0.1 mm (100 microns) Standard 0.2 mm (200 microns) Speed 0.3 mm (300 microns) Ultra Fast 0.4 mm (400 microns)	Fine 0.1 mm (100 microns) Standard 0.2 mm (200 microns) Speed 0.3 mm (300 microns) Ultra Fast 0.4 mm (400 microns)	Fine 0.1 mm (100 microns) Standard 0.2 mm (200 microns) Speed 0.3 mm (300 microns) Ultra Fast 0.4 mm (400 microns)
Print Head	Single Nozzle	Single Nozzle	Single Nozzle	Single Nozzle	Single Nozzle	Single Nozzle	Dual Nozzle
Nozzle Diameter	0.4 mm	0.4 mm	0.4 mm	0.4 mm	0.4 mm	0.4 mm	0.4 mm
Interface	USB 2.0, SD card(32G MAX)	USB 2.0, SD card(32G MAX), Wifi	USB 2.0, SD card(32G MAX), Wifi	USB 2.0	USB 2.0, Wifi	USB 2.0, Wifi	USB 2.0
Others	Auto-loading Filament	Auto-loading Filament	Laser engraver(Optional)		Auto-loading Filament	Laser engraver(Optional)
					Laser engraver(Optional)
Scan size			1x1 in~ 4.7x4.7 in			1.18 x 1.18”- 5.9 x 5.9”
Scan Accuracy			0.25mm			0.25mm
Turntable payload			≤3 Kg/6.6lbs			≤3 Kg/6.6lbs

Brand	XYZprinting
Series	da Vinci 2.0
Model	da Vinci 2.0 Duo
Part Number	da Vinci 2.0 Duo

Number of Extruders	2
Print Technology	FFF (Fused Filament Fabrication)
Build Material	ABS/PLA Filament
Build Size	5.90" x 7.80" x 7.80" (Max.)
Layer Thickness	100 - 400 microns
Filament Diameter	1.75mm
Interface	USB 2.0
Operation System Requirements	Windows XP (.Net 4.0 required) and Windows 7 above (for PC) Mac OSX 10.8 above-bit (for Mac)
Minimum Hardware Requirements	X86 32-bit / 64-bit compatible PCs with 4GB+ DRAM (for PC) X86 64-bit compatible Macs with 4GB+ DRAM (for Mac)

Printer Dimensions	20.00" x 18.40" x 22.00"
Printer Weight	54.40 lbs.

XYZprinting da Vinci 2.0 Duo FFF (Fused Filament Fabrication) ABS/PLA Dual Nozzle 3D Printer

WHAT'S YOUR COLOR?

Cloud Library

Safe

Low Maintenance

Great Value

Easy Loading

Dimensions

Package

Technology

Maximum Build Volume (WxHxD)

Resolution

Print Head

Nozzle Diameter

Filament Diameter

Filament Material

Display

Language

Connectivity

Software (XYZWare)

OS Support

Hardware

Learn more about the XYZprinting da Vinci 2.0 Duo

Customer Reviews of the XYZprinting da Vinci 2.0 Duo

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16828840014