
The device needs to be connected directly to your computer. WHY?--If you use a usb hub, the device is likely to be disconnected frequently due to insufficient power supply or even unrecognized by the computer.


Please refer to the picture attached to insert the plug as the indicated direction, or the enclosure won't work properly if the plug is inserted in a wrong direction.
Make sure that the flat end of the power connector is facing up.

No need to buy different hdd cases for different sizes of hard drive.
- 2.5" HDD: fixed with 4 screws at the bottom.
- 3.5" HDD: fixed with 4 screws on both sides

Keep your HDD/SSD in normal temperature.
- Cool all-aluminum enclosure.
- Air convection cooling duct design.
- Front and rear with large area cooling holes.
- 80 mm silent fan speed up convection and rapid cooling.

Four indicator lights monitor the status of each disk.
- Blue light: Power on
- Blue light flashing: Reading data
- Red light: Hard drive error
Troubleshooting Guide
- Q: How do i know if one of the hard drive is failed?
If one of the drives is damaged/failed, the corresponding indicator will turn red and the enclosure will make a warning sound(beep).
- Q: How to Replace A Hard Drive?
If you want to replace one of the drives in the enclosure with a new one, or one of the drives is damaged/failed, please take following steps:
1. Find the drive(bad one or the one you wanna replace). Eject the enclosure from the computer and then power off the enclosure.
2. Pull out the drive. Format the new drive on another device first. Then insert the new drive to the original position and turn on the enclosure.
- Q: How to add a new hard drive into the enclosure?
1. Safely eject the enclosure from your computer and then turn off the enclosure.
2. If the drive you want to add is a brand new drive, please format it on another device. Then insert it into the enclosure. Do not change the drive order.