Skip to: | - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.

If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message. - Computer Parts, Laptops, Electronics, HDTVs, Digital Cameras and More!

Sign up today for a 30-day free trial of Newegg Premier
  • Shipping Destination: United States
  • Wish List
  • Feedback
  • Help
Search all
Home > 
Computer Hardware > 
Computer Cases > 
Computer Cases > 
Silverstone > 
Item#: N82E16811163237

SilverStone Sugo Series SG10B Black Aluminum front panel, steel body MicroATX Mini Tower Computer Case

  • Aluminum front panel, steel body MicroATX Mini Tower
  • USB 3.0 / Audio Front Ports
  • 2 Internal 3.5" Drive Bays
  • Pin It
  • Email this page
ICON Loading...

Learn more about the Silverstone SG10B


Sugo Series


MicroATX Mini Tower
Case Material
Aluminum front panel, steel body
Motherboard Compatibility
Micro-ATX, DTX, Mini-ITX


Internal 3.5" Drive Bays
Internal 2.5" Drive Bays
Expansion Slots

Front Ports

Front Ports
USB 3.0 / Audio

Cooling System

120mm Fans
Rear: 1 x 120mm 1200rpm 22dBA
Left:1 x 120mm 1200rpm 22dBA (backward compatible with 92mm)
180mm Fans
Top: 180mm Air Penetrator 600/900/1200rpm, 17/25/34dBA (backward compatible with 140mm)

Physical Spec

354mm (D) x 220mm (W) x 295mm (H), 23 liters


External Drive Bay: 12.7mm/9.5mm slim optical drive x 1

Expansion Card: Compatible up to 13.3" long, width restriction-5.70"

Limitation of CPU cooler: 165mm

Limitation of PSU: 180mm

Support two Kensington locks

Support graphics cards of any length

Support full tower CPU coolers

Support Strider Plus PSUs up to 1000W

Mandatory cable routing design

Ample fan slots for maximum airflow

Cleanly styled aluminum front panel.

* If you intend to utilize all hard drive slots, please remove all unused power supply cables. These unused cables may cause problem with the installation. SSDs are highly recommended in place of hard drives.

** Maximum length for PSU is 180mm, we recommend 160mm due to varying connector locations on PSUs and the unique structure of SG09.

Quick Info


  • Limited Warranty period (parts): 1 year
  • Limited Warranty period (labor): 1 year

Customer Reviews of the Silverstone SG10B

Do you own this product? Write a Review

ICON Loading...

Filter Results

  • Abdullah W.
  • 7/17/2014 3:00:53 AM
  • Tech Level: High
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggsSmaller than most ITX Cases

Pros: Excellent layout and design. This thing is literally smaller than most ITX cases (looking at your Prodigy).

-I've fit Phanteks- PH-TC14PE, Cryorig R1 and a handful of other huge dual tower Heatsinks in the SG10 without issue. It's real CPU cooler height limit is closer to 170mm. Thermalright True Spirit 140 Power will not fit! I tried, it's too tall...barely.

-Will accommodate basically any size graphics card, just be careful with cards like GTX 780 Classy which is extra wide, it will interfere with your side fan mounting options.

-The best airflow setup I've found is to flip the top AP181 to exhaust, block the 80mm fan slot opening from the inside and retain either the single 120mm AP121 that comes with the cases side panel or use 2 92mm's. Ideally you'd want a cooler like the Cryorig R1 Universal which you can mount horizontally. This way the CPU coolers fans aid in the direction air is travelling, intake through the side to maintain positive pressure and exhaust out the top. The rear fan you can use as a option as well.

-It's very important to use a quiet powersupply since it's intake sits right at the front with nothing but basically cloth between your ears and it's fan. I opted for a hybrid model that doesn't spin until loaded or hits a predetermined Temperature.

-Another tip, use the PSU extension cable to create a wall/duct between it's edge so that air only escapes outside. I used zip ties against the PSU's honeycomb vent to align the cable vertically.

-Also the suggested powersupply length is 140mm, it will fit longer ones but you have to take into account the cables protruding which can interfere with closing the case.

-You are supplied with a 140mm bracket as an alternative for the top fan mount. I'd suggest keeping the 180mm mainly because a portion of it extends over the rear of the motherboard tray where you're HDD's are located. As mentioned above Silverstone setup the top fan as Intake out the box to blow air down onto your Hard Drives, regardless though flipping to exhaust instead as I mentioned above still helps get the heat built up back there out.

Cons: -The fan filter plastic mesh is pretty restrictive both on top and below. Especially with the top 180mm fan as removing it reduces noise greatly and lowers Temps.

-Speaking of the top fan it's by far the loudest component. Above 700'ish RPM I find it too intrusive. Tolerance to noise is subjective so you might find it Ok. It will go down to about 600 RPM.

-Case feet suck, I bought some nice silver accented ones that are 10mm in height making grabbing a hold of the case to move it a lot easier.

Other Thoughts: I really don't understand the complaints. Of course there will be compromises in packaging/design when it comes to something this size. With that in mind there is nothing else you can cram this much into with such a small foot print.

There is another guy down there who slams the case but the majority of his complaints just seem plain ignorant.

-The cases power light is white...not blue. The HDD activity light flashes blue in the middle.

-The cover itself is pretty decent thickness steel, unless you choose to sit on it or throw it down a set of stairs I see no way you could bend it out of shape unless that's your intention.

-The PSU ventilation case is not solid...are you reviewing the same case? It's open on both ends to give the user the option of allowing your PSU to intake from within the case or the exterior.

-Getting the cover on is very simple, what most people seem to be having issues with are the 2 lips at the very front of the cover which won't stay put until forward pressure is applied. It's pretty easy, line everything up with one hand and screw in the thumbscrew with the other. This is why the rear uses thumb screws.

-I really don't care whether the case uses screws for PCI slot covers or the retention bracket. Pretty irrelevant complaint.

1 out of 1 people found this review helpful. Did you? Yes No

  • William B.
  • 5/21/2014 7:10:53 PM
  • Tech Level: High
  • Ownership: 1 day to 1 week
  • Verified Owner

2 out of 5 eggsMade in China junk passed off as high end gear

Pros: *shrug* its a case? If it was engineered they way it almost looks, then it would be great. It fits full size graphics cards (though the side case fan will need to be removed).

Cons: Poorly configured PSU ventilation (solid cage) does not accommodate PSU with through flow design or fanless PSUs.

Poorly thought out card retention requires tools to remove the vent cover AND the add-in cards.

Power light is a backlit LED "bar" with blue HDD led in the middle of it. You can't see HDD activity unless you stare at it in a dark room.

Case cover fitment is not very good. The cover is barely held in place and harder than it should be to put in place. The two pieces are held together by a tiny screw that must be removed to remove the cover. Another tiny screw on the bottom must also be removed to remove the entire WRAP AROUND cover. In a word clumsy.

The cover is not very rigid. Crucial areas can be easily bent during assembly disassembly. Problem areas could have easily been embossed or creased to increase rigidity without a significant cost increase and zero weight increase.

Mine came with a bad (bad bearing) case fan.

Other Thoughts: Frankly, just more imported garbage that is engineered for look more than function. Why thumbscrews if a screwdriver is needed to remove the cover? Why put a blue HDD light in the middle of a BLUE power indicator? Why is the cover so flimsy? Why does the add-in card vent not hold the cards captive and instead they need to have screws in them as well? I fail to understand (even to make a price point) why the 3rd or 4th generation of a product line is not better designed than this. While this case may be better than some of the other garbage sold, it is still garbage that could have been so much better if just a bit of thought was put into the design. It is clear the cover screws were added because the thumbscrews were not enough to keep the poorly designed cover in place... FAIL! I used cases 15 years ago that were better built. It a shame that this is as good as it gets these days.

0 out of 2 people found this review helpful. Did you? Yes No

  • shaun b.
  • 2/4/2014 3:09:07 PM
  • Tech Level: Somewhat High
  • Ownership: 1 month to 1 year

3 out of 5 eggsGood product with a few design flaws

Pros: Case feels sturdy because of its weight and thickness of the metal. It is also very compact. Looks elegant and has a brushed finish on bottom and just looks good

USB 3.0 connections upfront

Cons: The fan area in front of the power supply is a bit to close which kept case from closing properly. I purchased Seasonic SS-760XP2 and using a 80mm or 90mm fan in that area still did no fit correctly.

To open case is not so bad but putting it back together can be a headache and keep you away from opening.

The front grill for mine does not completely stay flush with the front of case and sticks out just a tad. Nothing seems to be blocking behind it so not sure why it always pokes out at all but its not to noticable.

I never thought using a slot loader optical drive could be that bad but I was wrong. I purchased 2 so far and both have had problems and been far to loud and have had discs get stuck (their not as common so hard to find good quality for decent price).

Other Thoughts: Probably would not buy again but I do like the look on the outside.

Did you find this review helpful? Yes No

  • James K.
  • 1/26/2014 2:30:43 PM
  • Tech Level: Somewhat High
  • Ownership: 1 day to 1 week
  • Verified Owner

4 out of 5 eggsExcellent SFF Case

Pros: Small! I don't know why I ever used ATX cases. Fits huge graphics cards no problem. Also fits my 120mm CPU cooler. Definitely one of the funner builds I've ever done. Sturdy. I know this case is going to last.

Cons: It's a very tight fit with a big graphics card. The case fan for the card was smacked up against the power cables for the GPU.

The case sides are really hard to get on right and require two philips head screws along with the finger-screws in the back to hold them on...kind of pointless to have finger-screws if i'm going to have to break out a screwdriver regardless.

The instructions for installing hard drives are a bit vague, and one of the 2.5in drive holders was bent out of the box.

GPU Side Fan was really loud too...just unplugged it.

Other Thoughts: If you're looking for a cheap slot-loading DVD drive, use Newegg # 9SIA14J1051126. I can't remember if it's in the manual, but to install it you'll need to take the metal slot-loading drive cover off of the Sugo case (comes off with 2 philips-head screws) and take the little plastic cover inside of this cover out. Then it's just a matter of taking the DVD drive out of the 5-1/4" holder and pop it in the case. Works like a charm.

1 out of 1 people found this review helpful. Did you? Yes No

  • Justin P.
  • 1/13/2014 6:22:05 AM
  • Tech Level: High
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsGreat Case

Pros: Compact form factor
lots of airflow
removable dust filters
Lots of room for video cards
was even able to install a Coolermaster H60i water cooling radiator in it

Cons: Removable dust shields have plastic tabs... one arrived broken. I superglued it back on and has seemed to hold, but i havent removed them yet to clean them. Might have to contact silverstone about a replacement or an extra one

The slim slot load CD keeps the front looking nice, but make sure you do your research first... they can be expensive.

as others have stated the power supply cord compatability with power supplies can be iffy... make sure to know the position of the power connector on your power supply as well as the direction of the cable as some power supplies wont be compatible because of the way the cord hooks in.

Other Thoughts: Overall a great case. This was my first water cooling experiment, and even though its a small case, it worked out great for the most part. However some radiators will probably not allow enough room for a fat video card (i have a quadro 4000 in and it just fits)

Did you find this review helpful? Yes No

  • Julian P.
  • 12/17/2013 12:35:56 PM
  • Tech Level: Average
  • Ownership: 1 day to 1 week
  • Verified Owner

4 out of 5 eggsExcellent Micro-ATX Case

Pros: The case is a great small form Micro-ATX case, which allows room for a mid to high spec build without too many problems. There are not many small Micro-ATX cases on the market and this one is truely small.

The build quality is excellent. Made to last.

It can fit long graphics cards and CPU coolers.

The fans supplied are good and quiet, although I have not plugged in the supplied GPU fan yet.

Cons: The space to the hard disks is tight. I was able to get them in, but there is not much room to work.

This case requires a modular power supply as there is little room for cables, which increases the cost of the build.

Only a slim internal optical drive will fit, which again increases costs. Also the Sliverstone CP10 adaptor is required (Item#: N82E16812162016), which is not included in the case if you install an internal optical drive. This should be included since it is an obscure item.

There is not much airflow if two graphics cards are installed. However there are options to the number increase fans around them. Maybe a good SSF watercooling project?

Other Thoughts: In summary the main issues are the cost and the lack of space. The modular PSU and slim optical drive increase costs. However the the build quality of the case is excellent and I personally like the fact it is small.
I really like this case. It's not perfect, but all the cons come from the fact it's small, which I am happy to live with.
My favourate PC build to date.

Did you find this review helpful? Yes No

  • Timothy M.
  • 11/10/2013 7:08:00 AM
  • Tech Level: Somewhat High
  • Ownership: 1 day to 1 week

4 out of 5 eggsVery good case

Pros: Pros:
1. Excellent layout: I am able to fit a Noctua DH-14, R9 290X and 4x4gb g.skillz ripjaw RAM in this machine. I had to reorientate the DH-14 fan's to make airflow go up rather than out the rear(arguably good, based on my basic understanding of thermodynamics - heat rises). There are quick access screws that allow easy access to the CPU and cooler. If you are using a large cooling solution, you will find its a pain if you OC too much since everything except the MB has to be removed to get at the CMOS since its all buried under the GPU and the CPU (CPU cooling must be removed to remove GPU for me).
2. Forced cable management makes this computer SO much easier to work with once done right. I took my time assembling and I feel I did a really good job. I can get at any part without any issue in relatively short order
3. Case looks very nice and comes with a bunch of fans and is very stout. The top/side panel is a little hard to work with initially but once you get a good feel for how it attaches, it comes on and off very quickly

Cons: Cons:
1. Beware over-torquing screws. I gave one of the power supply chassis attachment screw an 1/8th of a turn to tighten and the head of the screw broke off in the main chassis. Impossible to fix. Since there is no impairment to its operational status/usability, I decided not to RMA. This is the only reason I have docked a star.
2. I also bought the silverstone short cable kit. Some times you will prefer to use the shorties, sometimes you will prefer the long ones. It truly depends on your hardware and PSU. I am using a 850w strider and the exact described scenario applied to me. I used the long PCI-E cables and CPU ATX cables but short mobo ATX cable.

Other Thoughts: Take aways:
1. Fits a R2 290X
2. Fits DH-N14 on LGA1155 chip
3. Fits 4 x 4gb gskillz ripjaw ram
4. Cable management done right goes a LONG way

3 out of 3 people found this review helpful. Did you? Yes No

  • Joseph T.
  • 11/6/2013 1:28:01 PM
  • Tech Level: High
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsNice little case

Pros: This was a nice change-up from the typical mid-tower builds. Small little fellow. Better than expected on cable routing. Need to use a modular power supply to minimize case clutter.

Not difficult, nice appearance, happy with life.

Cons: The case only accommodates a slim, slot loading optical drive. The pickings are slim and expensive.

I opted for an external USB drive for $20. I don't expect to use the optical drive much anyway.

Other Thoughts: It was a fun build.

Did you find this review helpful? Yes No

  • Joseph M.
  • 9/4/2013 8:03:49 AM
  • Tech Level: High
  • Ownership: 1 month to 1 year

5 out of 5 eggsDisgustingly-Awesome Case

Pros: I’ll start with this: this is hands-down the coolest, most entertaining case I have ever built with. Currently running a delidded 4770k (CLU and MX-4) in an ASUS Maximus VI Gene and I could not be happier. Side of the case has two 80mm and one 120mm Xigmatek Crystal White LED fans, running on a low-medium setting and all acting as intakes. Back of the case, with my H60 radiator (2013 version), has two Xigmatek 120mm AOS White LED fans operating as exhausts in a push/pull setup. The H60 is a tight fit, but it still fits. I left the top fan alone, which blows in/downward. Front of the case has my new Seasonic 760W Platinum PSU with the fan obviously facing towards the front filter/faceplate. This case is dead silent compared to the Antec Eleven Hundred that is just replaced.

I took a slightly different approach than most people may have with this case and drilled three sets of four mounting holes on the bottom of the case, right below my EVGA ACX GTX 780. Here, I stuck my new 1TB Raptor and also put my previous-gen 600GB Raptor and previous-previous gen 300GB Raptor. I could have put two of them on the back in the 2.5" mounting brackets, but would have been unable to fit more than one in each bracket pair (Raptors are fatter than a "normal" laptop-sized 2.5" disk.) Also, these things run way too hot if they don't have any air moving around them. Can't get better airflow than having three fans sitting less than a full inch away from them and blowing right on them.

On the back of the case, I've got two slightly older 1.5TB Caviar Blacks mounted on the 3.5" drive panel. Below that in the corner 2.5" bracket, I have a 60GB Vertex 3 and 256GB Vertex 4 sitting on top of each other. A hint for these 2.5" brackets is to flip your drives so their connectors are opposite one another (just flip one drive upside down.) Think: both name labels of the drives are facing outwards/away from one another. This makes it 100x easier to get the SATA power connectors to fit, rather than battling with them because they are directly on top of one another.

Delidded my 4770k (vice/plank/hammer method) and put Coollaboratory Liquid Ultra on the die. Used Arctic MX-4 paste on the sink. When idle, my GTX 780 sits at 26C-27C and my 4770k sits around 29C. Under a decent load, such as Guild Wars 2 with their removal of culling in maps and about 100 players whaling on a boss in the recent Clockwork Chaos "raids", my 780 never goes over 70C and my CPU hits around 42C. Will be overclocking both of these puppies in the near future.

Also a 32GB kit of G.Skill Trident X Series (4 x 8GB) ram @ 2400MHz on the board (runs like ice.) Egg number N82E16820231590.

Cons: As many other reviewers have mentioned, the power cable is a bit of a pain. I didn't get to the point where I destroyed my power cable while trying to plug it into the back of the PSU as some reviewers on other sites have claimed, but it is an *extremely* tight fit. It's enough that I thought the casing on the 120mm fan below it was going to be pushing into its own fan blades, but thankfully it is not. For those of you who visually plan out their builds like I do before I buy stuff, assuming you have the PSU's fan also facing out of the case, the ground prong on this particular PSU will be closest to the front of your case. This means you are going to be bending the power cable on top of your 120mm side fan. Just something to be aware of if you get the same PSU I did (again, 760W Seasonic Platinum, fully modular, hybrid fan design, N82E16817151120.) This PSU left a good chunk of room for managing and plugging in cables, but I’d imagine it’d be next to impossible if you went with a longer PSU.

Also, the rear 120mm fan panel and the side 80mm (right side if you are looking at the case) does not have any fan filters on them. Not a problem for me since I do not have an 80mm fan there and my rear panel is acting as an exhaust.

Another potential problem that some builders may run into is if they absolutely must have an internal optical disk drive. I did not put one in this build because I only ever use externals now, but it looks like you will need to be extremely picky with the size and power/data adapter that you get for it.

One other thing to note is that a number of reviewers have stated that getting the top panel back on this case is a pain in the rear. I did not have any trouble getting it back on, but I’m betting it’s attributed to size of the power cables that people are using. Most people probably have those sleeved cables with all of the wires in a tight bunch. The cables that come with this particular PSU are lined up flat alongside one another. You may have to take a look at the PSU’s pictures to see what I mean, but it definitely helps out in the end when having loads of cables stacked on top of one another.

Other Thoughts: Although I have been building custom rigs and repairing computers for years, I still do not think this is a difficult case to work with for a rookie builder...unless you are fully decking it out. If you are only adding maybe 1-2 2.5" drives, and maybe a 3.5", it's not very tough at all. You'll have tons of extra room behind the motherboard to stuff and route cables. However, if you intend on pretty much loading this thing like I did, just take your time and plan more before you order everything and dive into it. I really had a blast building with this case and wholly recommend it to anyone. Zip and velcro ties ftw.

Some parts were purchased from the Egg, others from the South American river site.


i7-4770k (Coollaboratory Liquid Ultra and MX-4)
ASUS Maximus VI Gene
EVGA GTX 780 w/ACX Cooler
G.Skill Trident X Series 32GB (4 x 8GB) kit @ 2400MHz
Corsair H60 (2013 version) w/2x Xigmatek XAF-F1255 in push-pull
Seasonic 760W Platinum PSU - SS-760XP2
OCZ Vertex 4 256GB
OCZ Vertex 3 60GB
2 x 1.5TB WD Caviar Blacks
1TB WD Raptor
600GB WD Raptor
300GB WD Raptor
2x Xigmatek 80mm White LED CLF-F8254 (side intakes)
Xigmatek 120mm White LED CLF-F1254 (side intake)

6 out of 7 people found this review helpful. Did you? Yes No

  • Ken D.
  • 8/9/2013 8:41:26 PM
  • Tech Level: High
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsAlmost Perfect

Pros: Great case... It's really just an SG09 with a new face... The SG09 was sooo darn ugly. I don't believe you can find a better MicoATX case to build a high end box.

It would be nice if Power Supply manufacturers would offer short cable kits for builds like this but that's not a SilverStone issue.

Cons: As previously mentioned, if you need to be in the case often, this may not be the case for you. It is kinda of a pain.

Did you find this review helpful? Yes No

ICON Loading...
Are you an E-Blast Insider? Subscribe Newegg e-Blast
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.

Home > 
Computer Hardware > 
Computer Cases > 
Computer Cases > 
Silverstone > 
Item#: N82E16811163237
Related Products
Apex’s MI 110 case is a great choice ...
The X QPACK2 boasts improved cooling over previous ...
Model Brand SilverStone Series Temjin Series Model TJ08B ...
General Brand SILVERSTONE Series MILO Series Model ML03B ...
Shop by Region: United States | Canada | China
VeriSign Click for the BBB Business Review of this Computers - Supplies & Parts in Whittier CAThis site protected by Trustwave's Trusted Commerce program Inc500
Policy & Agreement | Privacy Policy  © 2000-2014 Newegg Inc.  All rights reserved.
If the Adobe Reader does not appear when you click on a link for a PDF file, you can download Adobe Reader from the Adobe web site. nassau