Question 1

is this switch is gigabit switch?

Accepted Answer

The switch is a gigabit switch.  The lights on each port indicate whether the device you are connected to is 10 100 or 1000.  I haven't had any issues with it.  Just plug and go.

Question 2

Can this be mounted to a vertical wall? (hook the bottom of the switch to the wall with some screws).

I Don't have room for a rack right now since most are about 12" deep.

Accepted Answer

The unit itself doesn't have holes for screws but the rack mount brackets can be rotated 90 degrees and mounted to a wall that way.

Question 3

Did this switch include "fire wall"??

Accepted Answer

I don't think it does. If it does, I wasn't aware of it. 
It seems to be performing as expected. Its been power cycled, accidentally, 3 times since put into service and works as expected.

Question 4

Can two of these switches be stacked together?

Accepted Answer

No, not the way you are probably thinking.  If you do it you will have a bottleneck on which ever port you connect to another switch.  That said; if you are on a budget and do not have tons of data going across your network you "could" do it.  Worst possible case you could end up with approx. 50mbps.  If you can live with that then do it; otherwise maybe look at some "Stackable" switches.

Question 5

What version model is currently being shipped  V2 or V3?

Accepted Answer

Sorry it doesn't say on the unit and we tossed the box, but it works great on our server.

Question 6

Can I place this in my underground (but not climate controlled) garage (it's part of my walkout basement) ?

Accepted Answer

From the manufacturers website.  Non-condensing means no liquid water, as opposed to water vapor.  No temp below freezing.  If you meet these conditions you should be ok.

EnvironmentOperating Temperature: 0?~40? (32?~104?);
Storage Temperature: -40?~70? (-40?~158?);
Operating Humidity: 10%~90% non-condensing;
Storage Humidity: 5%~90% non-condensing

Question 7

This is a fanless design according to the Newegg overview, but some people say they could hear fan noise.  So, does it have a fan? Does anyone know what's the decibel level one foot away?

Accepted Answer

I'm not tearing it off the wall to check but I don't remember a fan and I certainly can't hear anything.  That said, manufacturers will sometimes change a model and not say anything.

Question 8

Says "power saving" ... what is the amperage or wattage on the label or measured?

Accepted Answer

I don't have a way to measure power usage.

The product overview states "The switch automatically powers down the ports that are idle and budgets power output for different Ethernet cable lengths".  This would result in varying power usage statistics for each network configuration.

Brand	TP-Link
Model	TL-SG1024D

Format	Desktop/Rackmount
Standards	IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x
Network Management Type	Unmanaged

Uplink Ports	None
Primary Ports	24 x RJ45
Primary Port Speed	10/100/1000Mbps

Switching Method	Store and Forward
Jumbo Frames	Yes

Protocols	TCP/IP
PoE	No
Layer	Layer 2 Only

Best Sellers

Meet Your Seller

TP-Link 24-Port Gigabit Ethernet Unmanaged Switch | Plug and Play | Desktop/Rackmount | Fanless | Limited Lifetime (TL-SG1024D)

Learn more about the TP-Link TL-SG1024D

Customer Reviews of the TP-Link TL-SG1024D

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Temperature	0°C to 40°C (32°F to 104°F)
Humidity	10% - 90%, Non-condensing

Dimensions & Weight
Dimensions	11.6" x 7.1" x 1.7"
Weight	5.1

Item#: 9SIA0ZX7E01507