Audio: Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
Impedance: 120 ohms
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Noise: 12 dB SPL
Dynamic Range: 136 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3.8 mA typical
Switches: Flat, roll-off; 10 dB pad (nominal)
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Audio-Technica Case Style: R5
Specification: Supported Sample Rates:
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Microphone Inputs:
Frequency Response: 20Hz - 20kHz +0.5/-1.5dB
Dynamic Range: 109 dB (A-Weighted)
THD+N: <0.001%
Noise EIN: -127 dBu
Maximum input level (without pad): +8 dBu
Maximum input level (with pad): +16 dBu
Gain Range: 50 dB
Input Impedance: 3 kO
Line Inputs
Frequency Response: 20Hz - 20kHz +0.5/-1.5dB
Dynamic Range: 109 dB (A-Weighted)
THD+N: <0.002%
Maximum input level: +22 dBu
Gain Range: 50 dB
Input Impedance: 49 kO
Instrument Inputs
Frequency Response: 20Hz - 20kHz +0.5/-1.5dB
Dynamic Range: 108 dB (A-Weighted)
THD+N: <0.01%
Maximum input level: +13 dBu
Gain Range: 50 dB3
Input Impedance: 1 MO
Line Outputs
Maximum Output Level (0 dBFS): +16dBu @ 0dBFS, or >21dBu where ADAT output is not used
THD+N: <0.001%
Ouput Impedance:
136 O (Balanced) - for units with seria...