Specification: Element: Condenser
Polar Pattern: Cardioid
Power Requirements: USB Power (5V DC)
Bit Depth: Up to 24 bit
Sample Rate: 44.1 kHz/48 kHz/96 kHz/192 kHz
Volume Control: Headphone volume controlled by up/down buttons
Headphone Output Power: 10 mW@16 ohms
Headphone Jack: 3.5 mm TRS (stereo)
Frequency Response: 30 - 15kHz
Package Contains: Pivoting stand mount for 5/8"-27 threaded stands
Tripod desk stand
2 m (6.6') USB-C to USB-C cable (USB On-The-Go Compliant)
2 m (6.6') USB-C to USB-A cable
Specification: ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20-20,000 Hz
OPEN CIRCUIT SENSITIVITY: -37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 144 dB SPL, 1 kHz at 1% T.H.D.
NOISE: 20 dB SPL
DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 74 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
Dimension: 6.38" (Long) x 2.05" (maximum body diameter)
Specification: Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Power Requirements: USB Power (5V DC)
BIT DEPTH 16 bit
Sample Rate: 44.1/48 kHz
Volume Control: Mix control; Headphone volume control
Frequency Response: 20 - 20,000 Hz
Feature: AT2020USB+ Cardioid Condenser USB Microphone Condenser microphone with USB output for digital recording
High-quality AD converter with 16-bit, 44.1/48 kHz sampling rate for superb audio
Headphone jack with volume control allows you to monitor the microphone signal with no delay
Mix control allows you to blend your microphone signal and pre-recorded audio
High-output internal