Question 1

does this come with case fans? and how much case fans can it hold?

Accepted Answer

No it doesn’t come with fans, it’s possible to fit a 120 in the bottom, but most power supplies will interfere as the clearance is very tight. I ended up ditching it ans the cable bends would have been too tight.   Air flow will be handled from gpu and cpu coolers and a mid range system runs perfectly cool in the case.  I did a 7700 / 470 combo in it that works well with temps maxing in high 70’s under heavy loads with rest temps in the 40’s.  It’s a tight case to build in, but it’s pretty case and really well laid out.

Question 2

Can this fit a triple height GPU?

Accepted Answer

The adjustable spine in the case should allow for a triple height GPU but you have to be aware of the height of your CPU cooler as the height of the CPU cooler will reduce the space available for the GPU

Question 3

What common durability problems or hardware failures have users experienced with the Case FD|FD-C-TER1N-03 after extended use?

Accepted Answer

The Fractal Design Terra Jade Mini-ITX case has shown solid durability with its anodized aluminum exterior and FSC-certified solid walnut panel, and users haven’t reported common hardware failures after extended use. The rugged build and lockable panels help protect components during transport and regular handling, making it a reliable choice over time.

That said, because it’s a small form factor case with a movable interior wall, builders might find limited room for larger cooling solutions or cable management compared to bigger cases. Users who push very high-end GPUs near the 322 mm limit should watch for airflow constraints, but for typical builds, the case holds up well without persistent issues.

Question 4

What are the best cooling solutions and fan configurations to pair with the Case FD|FD-C-TER1N-03 for optimal thermal performance?

Accepted Answer

The Fractal Design Terra Jade supports cooling solutions primarily through passive airflow given its compact 10.4 L size and limited fan mounting options. Its design favors small form factor builds where low-profile coolers or blower-style GPU coolers perform best to keep temperatures manageable, especially since it doesn’t list specific fan mounts aside from the included PCIe 4.0 riser cable space.

If you’re planning a higher TDP build or want to push performance, prioritizing components with efficient thermal profiles matters a lot here. You can also optimize cooling by ensuring unobstructed airflow through the open areas and using the case’s movable interior wall to improve layout and heat dissipation. Because the case is small, aggressive air or liquid cooling setups typical in larger towers aren’t feasible without compromises.

Question 5

Does the Case FD|FD-C-TER1N-03 require any BIOS or firmware updates before the first installation to ensure full hardware compatibility?

Accepted Answer

No BIOS or firmware updates are required for the Fractal Design Terra Jade Mini-ITX case itself before your first build since it's just a chassis. The case supports a range of Mini-ITX motherboards and includes features like a PCIe 4.0 riser cable, so compatibility depends more on your chosen components than the case.

Just keep in mind that any BIOS updates would come from your motherboard or GPU manufacturer, not the case. If you're using the included riser or very recent hardware, checking for the latest motherboard BIOS to maximize stability and performance is a good practice, but nothing specific is needed solely because of this case.

Question 6

How does the ease of installation and motherboard compatibility of the Case FD|FD-C-TER1N-03 compare to the NZXT H510 mid-tower case?

Accepted Answer

The Fractal Design Terra Jade Mini-ITX case is more compact than the NZXT H510 mid-tower, so installation can be a bit tighter and may require more careful cable management. It supports Mini-ITX motherboards only, whereas the H510 fits ATX, Micro-ATX, and Mini-ITX boards, giving the NZXT broader compatibility for different builds. The Terra Jade’s movable interior wall adds some flexibility, but overall, building in it is more space-constrained.

If you’re used to mid-tower builds like the H510, expect a more delicate process with the Terra Jade due to its small form factor. It’s ideal for a minimalist or small setup where size matters, but if you want easier installation or plan to use larger motherboards, the NZXT will be more straightforward. The included PCIe 4.0 riser is a nice touch but requires careful handling during installation.

Question 7

Is the Case FD|FD-C-TER1N-03 compatible with ATX, Micro-ATX, and Mini-ITX motherboards and what are its maximum supported RAM height and expansion slot configurations?

Accepted Answer

This case supports Mini-ITX motherboards only, so it won’t fit ATX or Micro-ATX boards. It’s designed to save space with a 10.4-liter volume, so it prioritizes a compact build, supporting components like GPUs up to 322 mm and two 2.5” SSDs. The maximum supported RAM height isn't explicitly listed, but small form factors like this usually handle standard low-profile or mid-height RAM modules.

Since it includes a movable interior wall adding 30 mm of build flexibility and a PCIe 4.0 riser cable, you can optimize component layout within the tight space. Just keep in mind that the limited motherboard compatibility means you’ll need to pick Mini-ITX boards, which could restrict expansion options compared to larger cases supporting ATX or Micro-ATX sizes.

Question 8

I'm not a gamer and wouldn't be installing a GPU into this box.  But I love the design and colors.  Does any ITX mobo fit?  Am I wasting money if on this box if I'm not a gamer?

Accepted Answer

The Fractal Design Terra Jade Mini-ITX Small Form Factor PC Case is compatible with Mini ITX motherboards. The case is valued for its design and aesthetics, which might appeal to users even if they are not gamers. It features a space-saving design, elegant solid walnut panel, and an anodized aluminum exterior, which could justify its purchase for someone who appreciates design and compactness, regardless of gaming use.

Question 9

I am considering a Corsair SF Series (2024) SF850, 80 PLUS Platinum, Fully Modular SFX Power Supply, CP-9020256-NA for this case.  It is an SFX psu, dimensions are 4.92*3.94*2.50, max length is 125mm. The PC builder flags it as incompatible with this case?  Am I missing something, the case specs state a SFX supply will work? Thanks.

Accepted Answer

The Fractal Design Terra Jade Mini-ITX PC Case is compatible with SFX power supplies, and it specifies a maximum PSU length of 130 mm. However, your Corsair SF Series PSU has a length of 125 mm, which should technically fit. There may be other factors in the PC builder tool that are causing it to flag as incompatible, such as cable management or additional components that you plan to use which might affect the space available for the PSU.

Question 10

What size PSU fits in this case? I ordered it with a Seasonic FOCUS GX-750 and it did not fit. 😢 I'm building it with a Ryzen 5 and RX7900 GRE... I guess I need ~700W, any suggestions?

Accepted Answer

The Fractal Design Terra Jade Mini-ITX Small Form Factor PC Case is compatible with SFX and SFX-L power supplies, with a maximum PSU length of 130 mm.

Type	Small Form Factor
Color	Jade
Case Material	Aluminum / Steel
With Power Supply	No
Power Supply	SFX/SFX-L
Power Supply Mounted	Rear
Motherboard Compatibility	Mini ITX
Side Panel	without Side Window

Internal 2.5" Drive Bays	2 (included)
Expansion Slots	3 in Max GPU Config, 2 in Max CPU Config

Fan Options	Total fan mounts: 1x 120 mm Bottom: 1x 120 mm
Pre-installed Fans	No Fan Installed
Radiator Options	Side: 120 mm (Max 121 mm wide w/ GPU up to 200 mm long and no 2.5" drives)

Max GPU Length	322 mm Max GPU Height: 131 - 145 mm depending on thickness Max GPU Thickness: 62 - 72 mm depending on height (Max GPU config)
Max CPU Cooler Height	77 mm in Max CPU config, 48 mm in Max GPU config
Max PSU Length	130 mm
Dimensions	13.50" x 6.02" x 8.58"
Weight	6.83 lbs.

Features	• Install your choice of high-performing GPU up to 322 mm in length, in a space-saving 10.4 L case • Add natural materials to your setup with a front-facing panel cut from FSC-certified solid walnut • Enjoy a sleek anodized aluminum exterior including an 8 mm-thick aluminum front • Find your build’s ideal balance with 30 mm of internal flexibility provided by a stepless, slidable central wall • Front-facing I/O featuring an aluminum power button and two USB ports including one USB Type-C 20Gbps • Get a head start on your build with the included PCIe 4.0 Riser cable • Store up to two SSDs in the dedicated 2.5” drive mounts • Swing open the side panels or slide off the top with an integrated tab for easy access • Make the most of natural airflow through the ventilated top, side and bottom panels • Transport your finished build safely with lockable top and side panels • GPU max dimensions (LxWxH): 322 x 72 x 131 mm / 322 x 62 x 145 mm in Max GPU Config, 322 x 43 x 131 mm / 322 x 33 x 145 mm in Max CPU Config • Radiator support: 120 mm side mounted (121 mm width max with GPU up to 200 mm long and no SSDs) Position of the motherboard spine can be adjusted left or right as needed for the ideal combination of max GPU width and CPU cooler height to suit the specific needs of the build. Adjusting board position off-center will allow greater GPU width at the cost of CPU cooler height and vice versa. Note that max GPU width also depends on GPU height with different restrictions for cards under or exceeding 131mm tall. See manual for further details.
Package Content	Terra Case Accessory box Manual

Backordered Items

Best Sellers

Sponsored Products

Fractal Design Terra Jade Mini-ITX Small Form Factor PC Case with PCIe 4.0 Riser

Learn more about the Fractal Design FD-C-TER1N-03

Customer Reviews of the Fractal Design FD-C-TER1N-03

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16811352214