Question 1

Can this drive be connected to a SATA controller with some sort of SAS-to-SATA adapter/cable?  If so, any recommended brand and part/model number?

Accepted Answer

No,  this is a SAS  drive,  and even though it shares a similar physical layer for connectivity,  the commands and responses between the drive and controller are different.   SAS == Serial Attached. SCSI.

Question 2

Will this work in my HP Pavillion desk top which is approx 6-7 years old?

Accepted Answer

It might, but although SATA is a subset of SAS, there's no guarantee that this drive will work in an older desktop system.  Key features may not function (like NCQ, or power state control).  Look through the docs on Segate's website for more specific info and controller compatibility.

Even if it were to work, I wouldn't pick this drive for desktop replacement.  Instead, I've been using the "fusion" drives, which I've been impressed with.  They're 128 GB of SSD married to a 500 GB platen drive, and no special drivers are required to manage TRIM or other settings.  They're quiet, low-power, and about the same price as this drive.

Question 3

Is this drive Dell certified?

Accepted Answer

No. Dell certified drives have Dell firmware installed. It works no problem on a Dell server but is not supported by Dell and will give a message in Open Management that it is a non-certified drive. if it doesn't load up on the array, try updating the firmware in the RAID controller.

Question 4

Is this drive compatible with iMac 27" Quad core Intel Core i7 from 2009?

Accepted Answer

No, this hard drive is not compatible.

You need a SATA hard drive (this one is SAS).

Use your favorite search engine to look for "Aluminum iMac Q&A - Updated May 27, 2011" - it has good info on how to upgrade the hard disk.

Brand	Seagate
Series	Constellation ES.3
Model	ST1000NM0023
Packaging	Bare Drive

Interface	SAS 6Gb/s
Capacity	1TB
NAND Flash Memory Type	Enterprise
RPM	7200 RPM
Cache	128MB
Average Latency	4.16ms

Features	Capacity-Optimized Enterprise Hard Drive for Bulk-Data Applications - Highest-capacity large form factor enterprise drive - up to 4TB - for demanding data growth - Sixth-generation drive technology with SAS and SATA interfaces for 24x7 reliability - Enhanced error correction, super parity and end-to-end SAS-based data integrity for accurate data storage - Industry-leading rotational vibration tolerance ensures consistent performance - Improved power and cooling efficiencies with low power consumption and on-demand PowerChoice technology based on T10/T13 power management standards - Multi-drive firmware maximized for enterprise RAID system availability - Robust performance with dual processors, ramp load technology, top-coverattached motor and humidity sensor for optimum performance in all chassis - Self-Encrypting Drive (AES-256) with FIPS 140-2 validation and Seagate Instant Secure Erase cuts IT drive retirement costs while securely protecting data at rest Best-Fit Applications - High-capacity RAID storage - Mainstream enterprise external storage arrays (SAN, NAS, DAS) - Cloud bulk data storage - Enterprise backup and restore - D2D, virtual tape - Centralized surveillance
Usage	For Enterprise Storage

Form Factor	3.5"
Height (maximum)	26.10mm
Width (maximum)	101.85mm
Length (maximum)	147.00mm

Best Sellers

Meet Your Seller

Seagate Constellation ES.3 ST1000NM0023 1TB 7200 RPM 128MB Cache SAS 6Gb/s 3.5" Enterprise Internal Hard Drive Bare Drive

Learn more about the Seagate ST1000NM0023

Customer Reviews of the Seagate ST1000NM0023

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: 9SIA6CCJV38164