Wired & Wireless Accessories

• Type: Consumer Electronics
• Type: Others
• Connector Number: 1
• Model #: SFP-H10GB-CU5M=

• Type: Standing Bracket
• Model #: WG9017

• Type: Other
• Model #: R3J16A

• Color: Black
• Specifications: Enclosure Type: Rubber Included in Package: 10 - dust caps
• Model #: SFPLCCAP10

• Type: PoE Splitter
• Color: White
• Specifications: Interface: PoE (Power + Data) Input Port: 1 x RJ-45 STP Data” Output Port: 1 x RJ-45 STP DC Out Plug Connector: 1 LED Indicator System: PoE In x 1 (Green) Network Cable: 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA / TIA-568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (varies on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE+ 52 ~ 56V DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of clients device can be powered: 1 Power Output: 12V DC, 2A max 24V DC, 1A max Standards Compliance: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3at...
• Model #: POE-162S

• Type: Power Supply
• Specifications: Hardware Version: 2 Input Voltage: 100-240V AC,50/60 Hz, 2.25A Power Output: 120 watts, 48V, 2.5A Installation: DIN rail TS-35/7.5 or 15 Safety & Function: Ul508, TUV EN60950-1 approved (meeting EN60204-1)
• Model #: PWR-120-48

• Features: • Hardened IP30 rated Gigabit PoE++ Injector • PoE (15.4W), PoE+ (30W), or PoE++ (90W) power • Network a PoE device located up to 100m (328 ft.) away • Extreme -40 to 75 °C (-40 to 167 °F) operating temperature range • Redundant power inputs with overload current protection • Includes DIN-rail mount and wall mount • Power supply sold separately (model TI-S15052,
• Weight: 1.9800
• Model #: TIIG90

• Model #: PD-9001GR-ENT

• Type: Jumper Power Cord
• Color: Black
• Specifications: Plug/Connector Type: IEC 60320 C14, IEC 60320 C15 Voltage Rating: 250 V AC Frequency: 50 Hz
• Model #: CAB-C15-CBN=

• Type: PoE Injector
• Color: Black
• Specifications: Hardware Version: 2 Interface: "Data" Input Ports: 4 x RJ-45 "Data+Power" Output Ports: 4 x RJ-45 Data Rate: 10/100/1000 Mbps LED: System: Power x 1 (Green) Per PoE Port: PoE ready / in-use x 4 (Green) Network Cable: 10Base-T: 4-Pair UTP Cat. 5 up to 100m (328 ft.) 100Base-TX: 4-Pair UTP Cat. 5 up to 100m (328 ft.) 1000Base-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m, 328 ft.) Power Requirements: DC 52V~56V PoE Power Supply Type: Mid-Span PoE Power Output: Per Port DC 52V 30.8 watts / 15.4 watts Power Pin Assignment: 4/5(+), 7/8(-) PoE Power Budget: 120 watts Number of 802.3af PD Class 0, 1, 2, 3 can be powered: 4 Number of 802.3at PD Class 1, 2, 3 can be powered: 4 Number of 802.3at PD Class 0, 4 can be powered: 4 Standards Compliance: IEEE 802.3 10Bas...
• Model #: HPOE-460

• Type: Consumer Electronics
• Color: Black
• Specifications: Interfaces/Ports: 4 x RJ-45 1 x RJ-45 Data Transfer Rate: 230 Kbps Serial Management: Telnet SNMP Digi Port Authority-Remote HTTP for easy browser configuration Status Indicators: Link / Power Input Voltage: 100 V AC to 240 V AC 9 V DC to 30 V DC Input Current: 400 mA 12 V DC 500 mA 9 V DC to30 V DC
• Parts: 1 year limited
• Model #: 70001807

• Type: PoE Repeater
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at Device Interface: 1 x Gigabit PoE/PoE+ in port 1 x Gigabit PoE/PoE+ out port 1 x Power port (optional power adapter is not included) LED indicators Installation mounting points Data Transfer Rate: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Power: Powered by PoE/PoE+ Device Consumption: 2 Watts (max.)
• Model #: TPE-E110

• Model #: R8W31A

• Model #: IFT-802T

• Type: Cable
• Specifications: Cable Type: Fiber Optic Cable Length: 6.56 ft Connector on First End: 1 x SFP+ Network Connector on Second End: 1 x SFP+ Network Conductor: Copper Device Supported: Network Device
• Model #: SFP-10G-AOC2M=

• Color: Black
• Model #: IPOE-E174

• Type: PoE Injector
• Specifications: Interface: "Data" Input Ports: 8 x RJ45 "Data + Power" Output Ports: 8 x RJ45 Management Port: 1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX Data Rate: 10/100/1000Mbps LED System: SYS PWR x 1 (Green), PoE Failure x 1 (Red), Fan Failure x 2 (Red) Management port x 2: 1000 (Green), 10/100(Orange) Per PoE Port: Ultra 60W PoE-in-use x 1 (Green), 802.3at/af PoE-in-use x1 (Orange), PoE Power Usage LED x4 (Green) Power Requirements: 100 - 240V AC, 50/60 Hz, 6.5A Power Consumption: 520 watts (max.) / 1774BTU Ventilation: Fan x 3 Enclosure: Metal PoE Standard: IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus 4-pair Ultra PoE PoE Power Supply Type: End-span / Mid-span / UPoE (Ultra PoE) Power Pin Assignment: Pair 1 end-span: 1/2 (-), 3/6 (+) Pair 2 mid-span: 4/5 (+), 7/8 (-) UPoE: 1/2 (-), 3/...
• Model #: UPOE-800G

• Type: Serial Server
• Color: Black
• Specifications: What's in the box: Digi Connect EZ Mini - serial server, 1-port, with accessories Power supply - 12 V, 2.5 A (76000823) DIN rail clip (76002095)
• Model #: EZ01-MA00-GLB

• Model #: ISW-621S15

• Type: N/A
• Specifications: Description: 8 Digital Inputs and 8 Digital Outputs Digital Inputs: 8 Logic Level 0: -30.0V to +1.0V Logic Level 1: +2.0V to +30V Latched Inputs: Triggered by user programmable positive or negative edges, stays true until acknowledged Counter Inputs: User progammable- counts positive or negative transitions up to 100Hz Watchdog: Active high/low, Pulsed high/low Digital Outputs: 8 Digital Output Type: Open drain transistor, protected MosFET. Short circuit protection up to 36V. Over temperature shutdown -175°C typical 150°C min Maximum Output Load Voltage: 30 VDC Maximum Output Current Sink: 0.85A per channel Serial Gateway: RS485 NuDam/ADAM compatible gateway Number of Ports: 1 Network Port Type: RJ45 Jack 10/100 MHz Autosensing, Cross Over Autosensing (MDIX) Network Protocols: ICMP, IP, TCP, DHCP, HTTP Protection: 1500V M...
• Model #: ED-588

• Type: Connector
• Specifications: Connector A: RJ45 (FEMALE) Connector B: RJ45 (FEMALE) Color: Silver
• Model #: N235-001-SH

• Type: PoE+ Injector
• Color: Black
• Specifications: Package Includes: NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector External power supply (Input: 100–240V, 50/60 Hz, 0.75A) (4) International plug adapters (North America, Europe, U.K., Australia) Owner's manual Power Consumption (Watts): 30.00 LED Indicators: Orange (Power On), Purple (PoE On) Unit Dimensions: 1.40" x 2.60" x 5.40" Unit Weight: 0.55 lb. Network Compatibility: 1 Gbps (Gigabit) IEEE Standards Supported: 802.3; 802.3ab; 802.3af; 802.3at; 802.3u PoE Capability: 30W (802.3at) PoE Supported Ports: 1 Side A - Connector 1: RJ45 (FEMALE) Side B - Connector 1: RJ45 (FEMALE) Network Switch Ports: 10/100/1000 (RJ45) PoE Type: Type 2 PoE+ (30W, IEEE 802.3at) Max. Power Delivered by PSE: 30.0 W
• Model #: NPOE-30W-1G-INT

• Type: Switches
• Features: • Industrial power supply with integrated DIN-rail mount • Provides up to 240 Watts of power (48 V, 5 A) • Built-in active PFC (PF > 0.93) • Short circuit/overload/over voltage/over temperature protection • High efficiency (94%) design • UL 508 approved • 100 % full load burn-in test • Extreme -25 to 70 °C (-13 to
• Model #: TI-S24048

• Type: MoCA Adapters
• Model #: 781360234976

• Part Number: JD096CST
• Type: Network Cable
• Specifications: Type: 10GBase direct attach cable - SFF-8431/ SFF-8432 Technology: Twinaxial Features: Passive cable Length: 4 ft Connector: SFP+ - latched Connector (Second End): SFP+ - latched Color: Black OEM Manufacturer Equivalent Part Number: HP JD096C Manufacturer Warranty: 2-year warranty General Network Cable Type: 10GBase direct attach cable - SFF-8431/ SFF-8432 Technology: Twinaxial Jacket Material: PVC American Wire Gauge (AWG): 30 Impedance: 100 Ohm Features: Passive cable Length: 4 ft Weight: 2.65 oz Color: Black Connectivity Connector: SFP+ - latched Connector (Second End): SFP+ - latched Miscellaneous OEM Manufacturer Equivalent Part Number: HP JD096C Compliant Standards: MSA, RoHS, FCC
• Model #: JD096CST

• Type: MoCA Adapters
• Model #: 781360234693

• Model #: ICX76502X40GQ

• Type: Switches
• Model #: TPE-315GI

• Model #: Q9G69A

• Type: PoE Injector
• Color: Black
• Specifications: Standards 802.3 10BaseT 802.3u 100BaseT 802.3ab Gigabit Ethernet 802.3at / af Power-over-Ethernet Physical Interface (1) Gigabit Data Port (1) Gigabit Data & Power Output Port (1) IEC-320 C6 AC Connector Power Input voltage : 100 to 240 VAC Input current: 0.8A maximum for 100 VAC AC input Frequency: 47-63Hz Maximum output power: 30W Pin4, 5:54V; Pin7, 8: Return Temperature Range Operating: 32 degree F to 104 degree F (0 degree C to 40 degree C) Storage: -22 degree F to 176 degree F (-30 degree C to 80 degree C) Humidity (non-condensing) Operating: 5 to 90% or less Storage: 5 to 90% or less LED Indicator: 1 x Power on Green Mounting: Wall (anchors & screws included) Dimensions: 1.30" x 3.90" x 2.27"
• Parts: Manufacturers Limited Warranty: 1 Year / Parts Onl...
• Model #: EPA5006GAT

• Brand: TRENDnet
• Part Number: TI-E100
• Type: PoE Extender
• Color: Black
• Model #: TI-E100

• Model #: JZ370A

• Brand: TRENDnet
• Model: ETH-F71
• Type: Switches
• Features: • Mount two TRENDnet TL2-FG7120 switches together in 1U/RU rack space • Includes two metal mounting brackets with screws for connecting two TL2-F7120 switches • Rack installation requires TL2-F7120 short brackets (included only with TL2-F7120) • Compatible only with TRENDnet TL2-F7120 switches
• Model #: ETH-F71

• Type: PoE Injector
• Specifications: Standard & Protocol: Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af , IEEE802.3at Standard: CSMA / CD, TCP / IP Port: 1 GE port 1 data&power output port supporting PoE Indicator: PWR, PoE Power output: 30W Operation Temperature: 0 degree C ~ 40 degree C Storage temperature: -40 degree C ~ 70 degree C Operating Humidity: 10% ~ 90% (noncondensing) Storage Humidity: 5% ~ 90% (noncondensing) certification: CE / FCC / ROHS Dimension: 1.30" x 5.16" x 2.36"
• Model #: POE30G-AT

• Brand: TRENDnet
• Part Number: TI-BEP200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Device Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE+ out port 1 x Gigabit 24/48V DC passive PoE out port LED indicators Wall mount IP67 housing Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB DIP Switch Adjust 24/48V DC passive voltage (default 48V DC)
• Model #: TI-BEP200

Limited time offer, ends 08/01

• Switch Type: Ethernet Splitter
• Uplink Interface: RJ45
• Primary Port Speed: 10/100/1000Mbps
• Package Contents: 1 x Gigabit RJ45 splitter adapter
• Model #: B03#Q2390_B