BEST SELLERS

In CPU Air Coolers

Works with Ausu Prime Z890-P full ATX board and Intel Ultra 7 265K processor. Very cheap. Very quiet fan. Very effective in cooling the CPU. Comes with 1 120mm fan, and extra metal clip to install another 120mm fan on the other side of the heat sink, if needed. Very large heat sink.

- quiet - color - cooling - super secure mount

Works good enough.

Instructions made sense and were accurate, easy to install (I had to multiple times because of driver issues with new cpu and swapping back and forth at least 4 times). New 5700X3D has not had a single issue. Dead quiet, seriously even without the front glass I cant hear it more then 3 feet away under load. Long boy screwdriver comes with and is great.

-The lower pitched fans make the higher rpms more bearable. -All Black -I aint had no problem yet

Runs beautifully for my budget build has zero problems gaming wise ( I mainly play rust which is a cpu heavy game)

Easy to install

Cooler fits into a Lian Li A3 with no height issue. Its been years now that I've used a air cooler - for the past 5 pc builds throughout the years building gaming PC's I've used a AIO from different brands. I'll tell you now I'm shocked to say air coolers have gotten better. I forgot the benifits of a air cooler over a AIO setup. The fan noise is more bearable over the humming sound you get from fans pushing through a radiator. The operaing temps with 100% cpu usage seems to not throttle my build in any way. I am now convince to jump back into air cooler wagon. As long you do your research about the tdp of the cpu you have - finding a air cooler to handle it would be idea over getting a AIO as a cooling solution.

Excellent Air Cooler A+ build quality Versatile, supports LGA 1700, AM4, AM5 My i5 never goes past 64c full load.

Great, it has a 270 watt tdp and it looks cool

- excellent cooling - easy to install - easy to clean - cools my 5950X and 3950X builds nicely sub 30 C

60c CPU temperature in a 94F environment for 3 hours!

Solid feeling heatsink build quality. Easy installation considering the dual stack push pull configuration. Allows room for RAM swap and a bit of clearance from side of case for airflow. Excellent temps with 5 Fractal case fans (2 front, 1 front floor, 1 rear, 1 above, 140's) at virtually silent speeds at idle. Fractal Meshify case 65-75 max degrees under gaming load, typically 55ish and fans on 75%, so I still have headroom on my 7900X if I wanted quieter or cooler but nothing my headset can't insulate against and tolerable db without one. Ended up with white RGB option due to sale, very nice for smoked glass sided case to glow against a nearby wall for some ambience and coordinates with other compatible RGB components well.

I wish they had this product years ago, it would have made installing a CPU a lot easier,

I had read comments that the fan came damaged - mine was in perfect condition. It arrived early even though it came from overseas. Super quiet too :) Took me some time to find a fan to fit my motherboard as I'm not very techy, so quite happy i have my pc back in working order :D

-Price -Easy to install (AMD 4/5) -Nearly as good as Noctua (1-2 degrees less) -Quiet

Last time I bought one of these must have been for an AM Socket 2 CPU. Was about 2/3rds the size of this one for AM 4. It fit in the new case by about 1/2" and gets barely warm to the touch when the system is running. Lots of heat dissipation for sure.

This is also my overall review, it's just pros. First, I am looking to cool my CPU for longevity and durability of the CPU and system, not for speed. That said: This ThermalRight air cooler is the best air cooler made, at least for what I've used so far. Understand it's 2 coolers, one for each half of your cpu and with 7 individual pipes to each heatsink, so it's 14 cooled pipes because the heatsinks are separate with a fan on each, but that's just for starters. But the big difference, the engineered design difference and you can see it for yourself, look at the photos of this cooler specifically the package contents photo. The cooler is pictured there on the upper left and no that's not a bad camera angle of the cooler. What you see there if you look closely is the pipes are longer to one side and offset to the center contact copper heatsink. When installing this cooler I'd strongly suggest you make sure to put that longer side up and have near that part of both coolers to draw and pull the heat off. This offset center with longer pipes is the huge, and I believe ultra significant, design difference. See when we place this cooler on the CPU it is on a flat horizontal surface. When this is tilted up the 90 degress it usually is in our tower cases, that angle up of the design on both heatsinks forces the heat to follow more to that side of the heatsink. the faster you pull off the heat the better as this design makes the heat rise more to that side of the heatsink, It's a law of physics heat pump essentially. This causes a higher volume of heat to be pulled off the CPU and by dissipation the lower (and slightly cooler) part of the heatsink and fins are actively transmitting the heat from that lower part to the upper part. It's ingenious in design and easily delivers the TDP of 270+ that this cooler is designed for. This ThermalRight cooler is absolutely perfect for my I7 14700KF. Browsing web temp: Around 30 Degrees C. Playing something graphics intensive, and temps averages 70-75 degrees, and never gets over 80. I had to fiddle with PWM a bit and make sure you look at the case fans to index them to the CPU temp and have them delivering cooler outside air at a faster rate than the 2 fans on this CPU cooler can take it in (i.e say 70% on CPU at 60 degrees Celsius, then make sure case fans supply at 75% at 55-60 degrees Celsius so cooler air is already in case before CPU hits 60 degrees Celsius). I must note, however, this cooler delivers even when you might not be good at adjusting the PWM fan controls. So if you're new or not really confident building a system, just make sure to get the cooler mount right on the CPU and I believe this cooler will deliver. CPU cools from 75C back down to 31C in less than 5 seconds. I used Arctic Cool 4x blah blah and usually use Ceramique so didn't expect this to be as responsive as it is. Oh and I lapped the heatsink up to 2000 grain polishing sandpaper. Beautiful discovery lapping this heatsink is the CPU surface contact heatsink is pure copper. I'll make it simple: Why spend $100+ on fluid cooling that has maintenance and still needs cleanup if you get a leak, when you can buy this ThermalRight heatsink for, at writing of review, $35 and know it will cool it perfectly through turbo temps of 5.6 ghz? And Tom's Hardware mentions the size of the cooler. I promise you it's bigger by maybe 20 cm but that the center offset makes it work out to be thinner on the video card side than a Master Cooler, which also means less heat transmission from the video card into the CPU. Also this cooler clears the curved up Corsair Vengeance DDR 5 RAM too. I hope this review helped you with your build and that if you choose this cooler you are as satisfied as I am or better. Thank you for your time.

- Great cooling performance - Perfect mount - Nearly silent