BEST SELLERS

In Computer Cases

Great look with ample space and cord management

I was a little pessimistic about the price point on this case compared to all the glowing reviews. Well I am very impressed with the quality of construction, features and thought that went into this case. Even the included fans are high quality and noticeably heavier than the fans I bought to install. The instruction manual is actually useful. There are places all over the case to manage your cables, including Velcro strips in the major arteries used for cables to go from point A to point B. A great set of screws and standoffs was also included. Love the magnetic filters. Free shipping to boot! Very satisfied. Added info for people looking: I put a Supermicro X9-DRi in this case. It does fit, but you will need to engineer some support from mid board up to the top. I used nylon standoffs attached to both the motherboard and the case to provide adequate support to the board. None of the holes lined up above mid board due to the proprietary Supermicro locations (EE-ATX). I used a single hidden zip tie at the top just to give it support when in a standing configuration. Not optimal, but works for my home server. I put two deep cool fans on the CPUs and it is about 30db at five feet all the while keeping them around 30C in idle. Quiet!

Has USBC - Nice carbon fibre accents - PSU, top and front removeable dust filters - 4 pre installed RGB fans - PSU cover - gpu brackets are removeable by screw not twist off.

Plenty of cooling options and enough space for several fans if you decide on merely air-cooling your rig. Minimalist, but stylish design. Fell in love with the series immediately, and it was the reason why I choose this over the Storm Enforcer.

Just love the corner glass sides. Ample room and plenty of space for fans. Build is not complete but once done will be my best build ever. It's been at least 10 years since my last computer build

Great design for a small case

Exceptional quality. Easy to build in.

Easy to work on

Plenty of space - 2x 240rad + 1x 280rad open loop, 11 fans, full size atx motherboard, 13900k, rtx4090, 12 hdd... crazy

It fits my gigabyte b560m and my amd radeon rx 6600 with my intel 10th gen core i5 6 core and 12 threaded cpu and 16gb ddr 2666mhz ram, and big cpu cooler

Big case. I mean big. Dual chamber makes it extra wide but easy to work on as well

For the price, you wont find much better than this. Beautiful lights, all changeable, very aesthetic. Gets the job done when cooling

Looks great Unified f-panel connector Overall easy installation

Build is great for the price! (And even beyond to honest) Good flow for most (read review below) Nice look, (not to gamer-y..) Easy to build in (For the most part) Has 2 5.25 bays! (getting rare these days) Good clearance for most parts (CPU coolers, GPU length, ect..) Good dust filtering

Great showcase design Clean looking modern style built in support bracket User manual

- No frills - Pre installed fans - Plenty of room for cable management

I upgraded to this case from an Antec 300 mid-tower case and love the cable management and extra space inside this case. My only problem was my motherboard did not work well with the PWM hub, but it is an older motherboard. Ordering some 4 and 3 pin splitters for the other fans to connect to the old motherboard. Full Tower Lots of Room Good cable management PWM Hub

The previous O11's were fantastic in their design, but a true full tower one was necessary with 140mm fans everywhere. All the little improvements add up. My RTX 5090/9950X3D rig stays very cool. HUGE bonus that I absolutely love is the removeable motherboard tray. It's a test bench, almost! (Anyone remember 3DGameMan saying "unfortunately, the motherboard tray is not removeable"? Well, this is! The PCI-E slot clamp design is genius. Two very simple "doors" that clamp down. No noticeable GPU sag on my massive card. The extended connectivity of USB, audio, and drive storage is brilliant. Open mesh on the back for CPU and PSU cooling is very nice. I love the fan filters on the top and bottom of the case. Easy to access.

Lot's of room in the front and back. Came with 4 nice ARGB fans with a hub for more can be add up to 6 (4) pin fans with ARGB. The 2 on bottom are some old ones I had. Got dust filter on 3 in take fans and a bottom filter. Even with full size broad installed got 2 areas for cable mangment and also set u for back side plug in MOBOs. All the glass fits nicely together with no gaps. Can run AIO with a little work behind the 3 pre installed fans or 120mm AIO in the back.

This was an upgrade from the Fractal Design Define C case. The main reason for the upgrade was to give my new AMD RX 7900 XTX more room. There was honestly not a lot of breathing room in the Define C case. As we'll for space you can install 8 140 mm case fans for maximum air flow. The side of the case for all the cables has so much room and no issues for cable management. Also if you need a fan hub because your motherboard does not have enough fan headers. The case has a small fan hub on the same side as the cable management.