
Easy to clone NVMe drives that would otherwise be a huge pain. No setup, built in functionality, just works. can handle a larger Target NVMe, which was my use case, upgrading an existing OS drive in a Laptop.


Simple to use, lots of options available for drive transfers

easy to install disk easy to use fast



Release Date: 11/13/2025
I've used 10-14GB external drives from Seagate and WD, and they run hotter than I would like. I tried an external case with a fan, but it was large and didn't hold the drive securely. Drives in this enclosure run much cooler than the manufacturer's external drive; I assume that's because the aluminum case acts as a heat sink. I saw that one review complained that the drive isn't held securely. At first I thought that was completely untrue, since the drive slides into the enclosure like a glove and the entire enclosure holds it securely. But, then I realized that the reviewer may have used a thinner drive. Since I'm using 16 and 18 TB drives, they're about an inch wide and are a perfect fit, but some drives are thinner. I put in a thinner drive, and indeed it can move around a bit, but the connecter can't pull out so it's not a problem. Perhaps this arrangement might damage the connecter if the drive were dropped from 6 feet, but it's never a good idea to drop a drive from 6 feet. That reviewer listed the drive-securing method as "must not buy"; I consider the drive-securing method as a pro, since it makes it easy to change the drive. I don't know whether a thin drive would run as cool as a thick drive; the thin drive would probably have less contact with the aluminum case.