Feature: The MPi4E provides an out of the box simple signage solution compatible with select NEC displays. The NEC MediaPlayer is pre-installed on the RaspberryPi 4 system on a chip solution that slots easily into the MultiSync ME, M, MA and 5th generation P Series displays. The MediaPlayer provides easy playback, playlist creation and scheduling of media files and utilizes the display's remote for navigation. In addition, the MediaPlayer can install a variety of content management systems directly on the system on a chip.
System Requirements: Computer with DVI video and 3.5mm stereo audio connectors
Monitor with a DVI video connector
Monitor with a 3.5mm stereo audio connector; or, a set of speakers with a 3.5mm stereo audio connector
Feature: For use where DVI video and 3.5mm stereo audio signals need to be transmitted from a computer to multiple sets of monitors/speakers
Video: Video Input:
Interfaces: 1 x HDMI Type A Female (Black)
Impedance: 100 O
Max. Distance: 3 m
Video:
Max. Data Rate: 10.2Gbps (3.4Gbps per lane)
Max. Pixel Clock: 340 MHz
Compliance: HDMI (3D, Deep Color, 4K), HDCP2.2 Compatible, Consumer Electronics Control (CEC)
Max. Resolutions / Distance: Up to 4K@70m (Cat 5e/6) / 100m (Cat 6a/ATEN 2L-2910 Cat6); 1080p@100m (Cat 5e/6/6a); *4K supported: 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0); 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
Audio: Audio Input: 1 x HDMI Type A Female (Black)
Other Connector: Unit To Unit: 1 x RJ-45 Female
Firmware Upgrade: 1 x Mini Stereo Jack Female (Black)
Power: 1 x DC Jack (Black) with locking
Distance: up to 200 ft. at 1024 x 768 (60Hz)
up to 150 ft. at 1920 x 1080 (60Hz)
Color: Black
LED Indicator: The Green RJ45 LED on the local unit illuminates to indicate it is connected to and receiving power from the source. The Orange RJ45 LED on the local unit does not illuminate. The Green RJ45 LED on the remote unit illuminates to indicate it is receiving power from the external power supply. The Orange RJ45 LED on the remote unit illuminates to indicate it is connected to the local unit and receiving a signal from the source.
Power Supply: Input: 100-240V, 50/60Hz, 1.5A
Output: 12.6V, 3A
Specification: Cable Type: VGA
Display Style: Splitter
Color: Black
Connector A: HD15 (FEMALE)
Connector B: RJ45 (FEMALE) x 4
Feature: Splits a single VGA signal into 5 (1 local, 4 remote)
Increase the number of displays to up to 25 (1 local, 24 remote) by daisychaining up to six B132-004-2 units together
A B132-100-1 or B132-100-WP-1 remote receiver unit is required for each connected monitor
Extends a 1920 x 1440 (60Hz) signal up to 500 ft., or a 1024 x 768 (60Hz) signal up to 1,000 ft., when using 24Awg, Solid Wire Cat5e/6 cable, such as Tripp Lite's N022-01K-GY (Cat5) and N222-01K-GY (Cat6)
EDID copy feature ensures optimal display compatibility
The range and number of monitors can be further expanded by adding B132-110 repeater units
Connect up to 4 remote unit...
System Requirements: Computer with an HD15 port
VGA or SVGA monitor with HD15M cable
Specification: Rugged Metal Case
Feature: Connects two computers to one monitor or two monitors to one computer
Fully-shielded rugged metal case with front-panel push button switch
Does not require external power, software, or complicated set-up procedures