Question 1

I am new to this stuff and wan to make sure I have the right parts for my iMac.  I know I need DDR2, PC2-5300 unbuffered, nonparity, 200-pin, 667MHz DDR@ SDRAM.  Will this product work??

Thanks for your help

Accepted Answer

It looks like you have the right match here. Just be sure that your iMac is able to use 4GB of memory. You may try to search for your iMac year and then type "max memory." Hope this helps.

Question 2

Would this product work on my early 2008 iMac that currently has 2 GB 800 MHz DDR2 SDRAM memory (2 slots - 1GB in each)? It runs OS X Lion 10.7.5 if important. Thanks! (I want to replace each slot with this 2GB one, totaling 4GB.)

Accepted Answer

I have a IMAC late 2006 and am running with 4 Gig 667MHz Mushkin SDRAM with Lion 10.7.5 with no problems. The system can not use all the memory because of the system limits. Make sure the speed is correct for you system and get the max memory you can pay for and your system will accept.
Dennis

Question 3

ram for 2007 imac?

Accepted Answer

Yes, this should work. I don't have an iMac though, so can't speak from experience. Double-check what I read by looking up your model on Apple's support site to get the technical specifications sheet.

Question 4

Will this ram work with my mac that runs lepord and its a desktop?

Accepted Answer

This ram can be used in a 2007 iMac. Yes it will work with snow leopard. Before you buy, post your model here and I can tell you if its compatible.

Question 5

Hi  this is for the 2007 Macbook Pro model ?

Accepted Answer

Yes. I used this same memory in a 2007 MacBook Pro and it really helped. I also upgraded the HDD to a Solid State Drive and those two upgrades brought that old MacBook back to life. Good luck.

Question 6

Hello,
I'm wondering, is this compatible with an early 2008 Macbook Pro intel core 2 duo 2.4 ghz?
Thanks for your input.

Accepted Answer

We put this memory into an even older MacBook 2.1, which is from 2006 or so. I think the later MB Pro's had DDR3, so this memory is the wrong kind for your MB Pro. 
Crucial has a memory finder on their site and there are some other finders out there from other makers. That's how i found the memory for our old Mac and then just looked it up on Newegg for better $.
Sorry i can't help you more.

Question 7

Is this compatible with the imac 7,1?

Accepted Answer

I am not sure but I had 4 GB from OWC and my system had problems. My IMAC is 6,1. I install the Mushkin upgrade and ALL my problems when away. The sysem is running with Lion and performing well. Good luck. If you can put more memory on your system you should do it. If you had a MAC 6,1, I would say do it.

Question 8

I have a 21.5-inch, late 2009 Desktop Mac.  I currently have 4 GB of RAM and am looking at 2x2GB more.  Is the correct product for me?

Accepted Answer

No. You want DDR3 1066, and you could get 4 x 4GB for a total of 16GB in that model. Check Apple's support site to double-check the technical specifications on your exact model.

Question 9

Will this work for a Mac Mini (mid-2007), MB139LL/A. 2.0GHz Intel Core 2 Duo?

Accepted Answer

No, follow the Apple guidelines that came with your computer. This RAM is twice the speed than your computer can handle.

Question 10

Is this the recommended ram for a 2007 MacBook pro laptop?

Accepted Answer

It works fine in the  2007 MacBook Pro.

Brand	Mushkin Enhanced
Model	976559A
Type	200-Pin DDR2 SO-DIMM

Capacity	4GB (2 x 2GB)
Speed	DDR2 667 (PC2 5300)
CAS Latency	5
Timing	5-5-5-15
Voltage	1.8V
Heat Spreader	No

Parts	Lifetime limited
Labor	Lifetime limited

Meet Your Seller

Mushkin Enhanced 4GB (2 x 2GB) DDR2 667 (PC2 5300) Dual Channel Kit Memory for Apple Model 976559A

Learn more about the Mushkin Enhanced 976559A

Customer Reviews of the Mushkin Enhanced 976559A

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies*

Manufacturer Contact Info

Item#: 9SIA1K6JJX1915