Specifications: Chipset ID: JMicron - JMS580
Drive Size: 22mm - M.2 SATA
Supported Drive Height(s): 2242 / 2260 / 2280
Compatible Drive Types: M.2 (SATA, B-Key, NGFF) / M.2 SATA (NGFF, B+M-Key)
Maximum Data Transfer Rate: 6 Gbps
MTBF: 50,000 hours
TRIM Support:Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
Drive Connectors: 1 - M.2 (SATA, B-Key, NGFF) Receptacle
Host Connectors: 1 - USB Type-C (24 pin) USB 3.1 (10Gbps) Male
Note:
Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
Package Contents: USB 3.0 to M.2 SATA External SSD Enclosure with UASP
1 x USB 3.0 Cable
1 x SSD screw kit
1 x Mini Screw Driver
1 x Instruction Manual
Specifications: Connector(s):
1 - Drive Connectors: M.2 (PCIe, SATA, M-Key, NGFF)
1 - Host Connectors: USB 3.1 USB Type C (10 pin, Gen 2, 10 Gbps)
Interface: USB 3.1 Gen 2
Bus Type: USB 3.2 Gen 2 10Gbps
Number of Drives: 1
Drive Size: 22 mm - M.2 NVMe
Compatible Drive Types: M.2 (PCIe, NVMe, M-Key, NGFF)
Drive Installation: Fixed
Compatible Drive Types: M.2 SATA (NGFF, B+M-Key)
Supported Drive Height(s):
2230
2242
2260
2280
Chipset ID: Realtek - RTL9210B
1 - LED Indicators: Power & Activity
Maximum Data Transfer Rate: 10 Gbps
Type and Rate: USB 3.2 Gen 2 - 10 Gbit/s
UASP Support: Yes
TRIM Support: Yes
4Kn Support: Yes
Type and Rate: NVMe (PCIe Gen 3)
Insertion Rating:
USB-C: 10,000 cycles
M.2: 60 Cycles
General Specifications: Fully compatible with M.2 SATA, AHCI and PCIe NVMe based drive...
Specifications: Cable Length (m): 0.064008
Input Plug Type: USB A (Male)
Side A - Connector 1: USB 3.0 A (MALE)
Side B - Connector 1: 22 PIN SATA + POWER (FEMALE)
System Requirements:
Device with USB port (USB 3.0 required for USB 3.0 speeds)
UASP-enabled host controller required for UASP performance
2.5 in. SATA HDD or SSD with 9.5 mm maximum height
Type: Office Products
Weight: 0.35
Package Contents: U357-025-UASP USB 3.0 SuperSpeed External 2.5 in. SATA Hard Drive Enclosure
USB 3.0 Micro-B cable, 1 ft.
Owner’s manual
Package Contents: U339-002 USB 3.0 SuperSpeed to Dual SATA External Hard Drive Docking Station
2.5-ft. USB 3.0 Device Cable
External Power Supply with NEMA 1-15P Plug (Input: 100-240V, 50/60Hz, 1.5A; Output:12V, 3A)
Owner’s Manual
Specifications: Device Support: SATA III/II/I HDD or SSD or Hybrid
Device Size: 3.5" or 2.5" SATA HDD/SSD/Hybrid
Internal Interface: Standard SATA
External Interface: USB 3.1 Type C
Interface Cable x2:
USB Type-C to Type-C (for system with Type-C port)
USB Type-C to Type-A (for system with Type-A port)
USB cable Length: 30 inches / 800mm each
HD Capacity: Up to 12TB
Material: Aluminum Casing, ABS Tray
AC Adapter Output: 12VDC, 2A.
Dimensions: 104 x 40 x 15 mm / 4.1 x 1.6 x 0.6 inches
Specifications: M.2 size: Length support 2230, 2242, 2260, 2280
M.2 Support: M.2 NVMe with "M" Key Only
USB cable connector: USB-C to USB-C
USB cable length: 300mm / 11.8 inches
Features: Slim aluminum 2.5" USB 3.0 HDD SATA External Hard Drive Disk Enclosure SATA III to USB 3.0 enclosure,Super Speed USB3.0 offer Speed up to 5Gbps, Ten times of USB2.0 UASP enclosure, 20% faster than traditional USB 3.0, lower CPU utilization Compatible with 7mm~ 9.5mm slim 2.5 inch SATA I,SATA II
Package Contents: 1 x 2.5 inch HDD Enclosure 1 x 1.64ft USB Data Cable 1 x Screwdrive 1 x Screws package
Specifications: The tool less design, portable storage is truly a portable solution. It turns your M.2 SATA base SSD Enclosure B Key into a storage solution via a USB 3.1 Gen 2 connection, at up to 10Gbps throughput.
The M.2 SSD enclosure fits easily into your laptop bag, which is ideal for traveling and carrying. Its lightweight yet durable ABS plastic housing helps to ensure your drive won't be damaged while you're on the move.
Compatible with NGFF SSD size 2230 / 2242 / 2260 / 2280, the enclosure works with tablets, laptops and desktop computers and other USB-enabled devices with its included USB C cables. Supports Widows or Mac OS X or above.
Type: Enclosure
Number of Bay: 1
Package Contents: B-Key Enclosure
USB 3.1 Type C to Type A
Manual
Specifications: M.2 SSD Support: M.2 (NGFF), B Key or B+M Key
Internal Interface: 1 x M.2 (NGFF, B-Key)
External Interface: Standard USB 3.0 Micro-B
Computer Interface: USB Type A required
USB cable connector: USB 3.0 Micro-B and USB 3.0 Type-A
USB cable length: 475mm / 18 inches
Specifications: Support Drive Size: 1 x M.2 PCIe NVMe SSD (2230/2242/2260/2280/22110)
Host Interface: USB 3.2 Gen 2
Power Input: Via USB
Transfer Rate: Up to 10Gb/s (Depending on hard drive speed)
Structure / Material: Aluminum & Plastic
Product Dimension (L x W x H): 150 x 63 x 12mm
Product Net Weight: 99g
Drive Activity LED Indication: SSD power: solid blue; SSD access: flashing blue