Your Browsing History

Shipped by Newegg
Make informed decisions with expert advice. Learn More
Brand | PLANET |
---|---|
Model | IGS-4215-4P4T |
Format | DIN-rail and Wall-mount Ear |
---|---|
Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow Control and Back Pressure IEEE 802.3ad Port Trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2 |
Network Management Type | Managed |
Primary Ports | 8 x RJ45 |
---|---|
Primary Port Speed | 10/100/1000Mbps |
MAC Address Table | 8K |
---|---|
Switching Method | Store and Forward |
VLAN Support | 802.1Q tagged-based VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling (VLAN stacking) Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP Management VLAN |
Jumbo Frames | 10KB |
Buffer Memory | 4.1MB |
---|---|
Protocols | Spanning Tree Protocol: IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) STP BPDU Guard, BPDU Filtering and BPDU Forwardin |
Security | Storm Control support: Broadcast/unknown unicast/unknown multicast Authentication: IEEE 802.1X port-based network access authentication Built-in RADIUS client to cooperate with the RADIUS servers DHCP Option 82 RADIUS/TACACS+ authentication Access Control List: IPv4/IPv6 IP-based ACL IPv4/IPv6 IP-based ACE MAC-based ACL MAC-based ACE MAC Security: Static MAC MAC filtering Port security for source MAC address entries filtering DHCP snooping to filter distrusted DHCP messages Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding IP source guard prevents IP spoofing attacks DoS attack prevention |
PoE | PoE Standard: IEEE 802.3af/802.3at Power over Ethernet PSE PoE Power Supply Type: End-span PoE Power Output: IEEE 802.3af Standard Per port 48V - 56V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard Per port 50V - 56V DC (depending on the power supply), max. 36 watts Power Pin Assignment: 1/2 (+), 3/6 (-) PoE Power Budget: 144 watts (depending on power input) Max. Number of Class 2 PD: 4 Max. Number of Class 3 PD: 4 Max. Number of Class 4 PD: 4 |
SNMP | Yes |
QoS | 8 mapping IDs to 8 level priority queues Port number 802.1p priority DSCP/IP precedence of IPv4/IPv6 packets Traffic classification based, strict priority and WRR Ingress/Egress Rate Limit per port bandwidth control |
LACP | Yes |
Layer | 2 |
Port Mirroring | Many-to-1 monitor |
LEDs | 3 x LED for System and Power: Green: DC Power 1 Green: DC Power 2 Green: Power Fault 2 x LED for PoE Copper Port (Port-1~Port-4): Green: LNK/ACT Orange: PoE-in-use 2 x LED for 10/100/1000T Copper Port (Port-5~Port-8): Green: LNK/ACT Orange: 1000Mbps 4 x LED for PoE Power Usage (W): Orange: 30, 60, 90 and 120W |
Button | Reset Button: < 5 sec: System reboot > 5 sec: Factory default |
Power | 48 - 56V DC, 3.5A (max.) 5.04 watts, 17.1BTU (Standby without PoE function) 7.28 watts, 23 BTU (Full loading without PoE function) 151.28 watts, 516.1 BTU (Full loading with PoE function) |
Features | Physical Port: 8-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE Injector (Port-1 to Port-4) RJ45 console interface for switch basic management and setup Industrial Case & Installation: IP30 aluminum case DIN-rail and wall-mounted design Supports -40 to 75 degrees C operating temperature Supports ESD 6KV DC Ethernet protection Redundant power design: 48V - 56V DC wide power input Switching: Hardware based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation 8K MAC address table size 10K jumbo frame Automatic address learning and address aging Supports CSMA/CD protocol Layer 2 Features: Supports VLAN Supports Spanning Tree Protocol Supports Link Aggregation Provides port mirror (many-to-1) Loop protection to avoid broadcast loops Multicast: Supports IPv4 IGMP snooping v2, v3 Supports IPv6 MLD snooping v1, v2 IGMP querier mode support IGMP snooping port filtering MLD snooping port filtering Management: IPv4 and IPv6 dual stack management Switch Management Interface User privilege levels control Built-in Trivial File Transfer Protocol (TFTP) client Static and DHCP for IP address assignment System Maintenance SNTP Network Time Protocol Cable diagnostics Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED SNMP trap for interface Link Up and Link Down notification Event message logging to remote syslog server Four RMON groups (history, statistics, alarms and events) PLANET Smart Discovery Utility |
---|
Dimensions | 2.83" x 6.34" x 4.21" |
---|---|
Weight | 2.21 lbs. |
Temperature | -40 - 75 degree Celsius (Operating) -40 - 85 degree Celsius (Storage) |
---|---|
Humidity | 5% - 95%, Non-condensing |
First Listed on Newegg | June 30, 2017 |
---|
Warranty Notice:
This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.