Your Browsing History
Most customers receive within 3-7 days.
Meet Your Seller
Visit JacobsParts Store
FOLLOW
DC 100V 100A Voltmeter Ammeter Volt Amp Meter Voltage Current Tester with Shunt
- Simultaneously monitor DC voltage up to 100V and current up to 100A A heavy duty 75m external shunt handles the current
- Auto ranging 0.01V 0.01A precision ±0.1% voltage tolerance ±1% current tolerance Working current: <20mA Refresh rate: 300ms
- Size: 48x29x22mm Hole size: 46x27mm Operating Temp: -10 - 65 DC only, not for use with AC 4-28V supply voltage
- There are potentiometers on the back of the unit to calibrate voltage and current. In order to get accurate readings, it is necessary to calibrate against a known voltage and current on first use. The meter may display 0 current until it has been calibrated.
- Note: If the meter supply voltage (thin red wire) is the same as the load, then it must only be used with 4-28V or the meter may be damaged
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Simultaneously monitor DC voltage up to 100V and current up to 100A A heavy duty 75m external shunt handles the current
Auto ranging 0.01V 0.01A precision ± 0.1 % voltage tolerance ±1% current tolerance
Working current: <20mA Refresh rate: 300ms
Size: 48x29x22mm
Hole size: 46x27mm
Operating Temp: -10 - 65 DC only, not for use with AC 4-28V supply voltage
There are potentiometers on the back of the unit to calibrate voltage and current. In order to get accurate readings, it is necessary to calibrate against a known voltage and current on first use. The meter may display 0 current until it has been calibrated.
Note: If the meter supply voltage (thin red wire) is the same as the load, then it must only be used with 4-28V or the meter may be damaged
Auto ranging 0.01V 0.01A precision ± 0.1 % voltage tolerance ±1% current tolerance
Working current: <20mA Refresh rate: 300ms
Size: 48x29x22mm
Hole size: 46x27mm
Operating Temp: -10 - 65 DC only, not for use with AC 4-28V supply voltage
There are potentiometers on the back of the unit to calibrate voltage and current. In order to get accurate readings, it is necessary to calibrate against a known voltage and current on first use. The meter may display 0 current until it has been calibrated.
Note: If the meter supply voltage (thin red wire) is the same as the load, then it must only be used with 4-28V or the meter may be damaged
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by JacobsParts Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...