Q: What are the power supply requirements? They do not seem to appear anywhere. I would like to power the thing with my own power supply.

the Jetson TK1 board uses between 1.5W to 45W depending on what you plug into it (through USB, mini-PCIe, SATA, SD-card, HDMI, audio, GPIO, expansion port, etc). The absolute max power draw of Jetson TK1 if you push everything to the limit and use every port including SATA and PCIe is 58W (4.8A @ 12V). So a 10W to 15W power supply is enough for powering Jetson TK1 in most cases, but a 60W power supply will ensure you always have enough power in all cases.

Q: Where can I find a manual?

Manuals are available on-line at the support site for this product. Unfortunately, Newegg rules seem to prevent me from giving you the link! developer dot NVidia dot com has a jetson-tk1-support page.

Question 1

Does it have an SD card slot?

Accepted Answer

Yes, it has an SD slot.  It also has flash embedded, which is pre-flashed with Linux for Tegra, essentially Ubuntu 14 for ARM 32-bit, so you can boot the system without an SD card.

Question 2

Does this come with the fan for the processor? Some of the product images online show it without any cooling.

Accepted Answer

Yes, it comes with the CPU fan already attached.

Question 3

is this x86 cpu compatible?

Accepted Answer

This is a stand alone Linux system with ARM processors.  Of course you can use a PC to ssh in over the network to talk to it, also.

I wanted ROS support on mine and had no real trouble putting a new filesystem onto an SD card from Windows.  You just have to get it formatted correctly, which was a pain on Win7, 64bit.

Question 4

what kind of casing would you use with this ?

Accepted Answer

I use kit in labaratory environment, so I just added plastic plate over board using 4 spacers and appropriate screws

Question 5

How big is this development kit?

Can we upgrade this in any way

Is there any OS is compatible with it?

Is their any good touchscreens for this to make this into a DIY tablet?

Accepted Answer

The development kit is 5 in square and slightly less than one inch high.  
It is not upgradeable aside from the periphals that can be added, e.g. an SD card, sata drive with included power connector, fan connector, and mini pci-express.
The kit has Ubuntu 14.04 pre-installed.  It is compatible with any version of Linux built for Arm architectures.
I've tried a Lenovo 19" touchscreen, and it seems to work fine.  It has two I/o connectors, one of which is for a touchscreen, that I haven't tried so I am unable to speak to its capabilities.

Question 6

Is it possible to add more than the 2gb of memory?

Accepted Answer

I don't believe so. It has 2GB Mem and 16GB eMMC on board. It has a mini-PCIE slot for expansion. It does, however, have a port to attach a Solid state hard drive, or other sata3 hard drive.

You might want to look at the tk1 website at nVidia for more details.

Question 7

Can I run Android on this or I had to use Linux?

Accepted Answer

At the moment, unfortunately, you have to run linux because NVIDIA has not ported Android to the dev kit. A huge mistake, if you ask me, but then again, this is a development kit focused on wetting your lips on the silicon and CUDA. This dev board is for developers to cut their teeth on CUDA, rather than any real focus on product integration. When the 64-bit Denver dev board comes out soon, I have a feeling that it will ship with an option for Android.

Question 8

how thick is this thing????????????

Accepted Answer

Well, its a standard PCB thickness (<2mm).  If you want the overall thickness, its about 1".  You should be able to deduce this from the height of the serial port.  If you cant determine which one that is, you probably shouldnt be buying this as its a dev board.  Go buy a Pi or something.

Question 9

What are the power supply requirements?

They do not seem to appear anywhere.

I would like to power the thing with my own power supply.

Accepted Answer

the Jetson TK1 board uses between 1.5W to 45W depending on what you plug into it (through USB, mini-PCIe, SATA, SD-card, HDMI, audio, GPIO, expansion port, etc). The absolute max power draw of Jetson TK1 if you push everything to the limit and use every port including SATA and PCIe is 58W (4.8A @ 12V). So a 10W to 15W power supply is enough for powering Jetson TK1 in most cases, but a 60W power supply will ensure you always have enough power in all cases.

Question 10

Where can I find a manual?

Accepted Answer

Manuals are available on-line at the support site for this product.  Unfortunately, Newegg rules seem to prevent me from giving you the link!  developer dot NVidia dot com has a jetson-tk1-support page.

Brand	NVIDIA
Model	CD575M
Combo Type	Motherboard / CPU / VGA Combo

CPU	NVIDIA 4-Plus-1 quad-core ARM Cortex A15 CPU
Memory	2GB memory with 64 bit width 16GB 4.51 eMMC memory

LAN Chipset	Realtek RTL8111GS
LAN Speed	10/100/1000Mbps

COM	1 x RS232 serial port
HDMI	1 x HDMI
USB 3.0	1 x USB 3.0
Audio Ports	2 Ports

NVIDIA Jetson TK1 Development Kit

Learn more about the NVIDIA CD575M

Customer Reviews of the NVIDIA CD575M

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16813190005