Upgrade W10830046 Refrigerator Door Gasket Seal, Freezer Door Seal Compatible with Whirlpool KitchenAid Jenn-Air Kenmore Fridge, Replaces PD00040604, W1016399, W10443241, 4502677, 42.67"x 16.92"

Part Numbers This refrigerator door gasket replaces part numbers W10830046, W10163997, W10443241, 4502677, AP6048305, PS12069725, and EAP12069725. Dimensions The refrigerator door gasket measures 42.67 x 16.92 inches.
Note: Please verify the model and dimensions of your original gasket carefully before purchase. Many door gaskets appear similar but are not identical in model and size. Select based on the model and size, not the appearance. Compatible Models This freezer door gasket fits major brands such as Whirlpool, KitchenAid, Kenmore, and Jenn-Air.
Compatible models include: KRFC302EBS00, KRFC302EBS02, KRFC302EBS08, KRFC302EBS09, KRFC302ESS00, KRFC302ESS02, KFCP22EXMP1, KFCP22EXMP2, KFCP22EXMP3, KFCP22EXMP5, KFCS22EVBL00, KFCS22EVBL1, KFCS22EVMS2, KFCS22EVMS3, KFCS22EVMS8, KFCS22EVWH00, KFCS22EVWH1, JFC2290VEP1, JFC2290VEP10, JFC2290VEP6, JFC2290VEP7, JFC2290VEP8, JFFCF72DKL00, JFFCF72DKL01, JFFCF72DKL04, JFFCF72DKL05, JFFCF72DKM00, JFFCF72DKM01, JFC2290VEM2, JFC2290VEM4, JFC2290VEM5, JFC2290VEM6, JFC2290VEM8, JFC2290REM04, JFC2290REM05, JFC2290REP00, JFC2290REP02, and others. Upgraded Thickened Quality This refrigerator fresh food door gasket is constructed from food-grade thickened silicone, resistant to high and low temperatures, flexible, and tear-resistant. It incorporates a double-layer sealing structure design, combined with a thickened edge and wavy folds, to snugly fit the refrigerator door gap and prevent cold air leakage. This minimizes cold air loss and reduces energy consumption. It addresses typical refrigerator issues such as: 1) broken or torn door gasket, 2) worn or dirty gasket, 3) leaking seal, and 4) condensation, frost, or ice buildup inside. Easy to Install 1) Due to shipping, the gasket may be folded. Soak it in warm water at 60-70 degrees for 30 minutes until kinks and creases disappear. 2) Use a hair dryer on a low setting to dry it, verifying again that it is flat with no creases or kinks. 3) Remove the old door gasket. 4) Secure the four corners of the new seal first, then press all four sides in turn to align and tighten it on the refrigerator door. 5) Close the door, check for any creases, and use a hair dryer to heat and flatten them. 6) Close the refrigerator door, secure it tightly with tape, and remove the tape after 24 hours. Maintenance & Notes - Ensure the new gasket is a perfect match for your refrigerator model, as an improper fit may affect sealing performance. - Avoid overstretching the door gasket during installation to prevent deformation. - If unfamiliar with the installation process, refer to your refrigerator's manual.

- Check alignment seasonally, as temperature changes may loosen the seal. After installation, the refrigerator's sealing performance and energy efficiency will be significantly improved