Small TV Wall Mount 19-32 in, Fits 24 in TVs, Tilt Swivel, 44 lb VESA 75x75-100x100mm, 44 lb capacity, fits 19-32 in TVs incl 24-27 in, tilt swivel, 2.6 in profile, wood/metal stud, concrete

MEASURE BEFORE YOU BUY: Fits 19 to 32 inch TVs and monitors up to 44 lbs with VESA 75x75mm or 100x100mm mounting patterns. Check the back of your
TV: the four bolt holes should measure about 3 or 4 inches apart before ordering. Every unit ships with all hardware and tools included. BUILT FOR A GENUINE SMALL-SCREEN FIT, NOT
A SCALED-DOWN BIG MOUNT: VESA 75x75 and 100x100mm cover true small-screen hole patterns precisely, while still holding 44 lbs, matching the capacity of mounts built for TVs nearly twice this size. TILTS DOWN AND SWIVELS SIDE TO SIDE: Angle the screen up to 12 degrees down to cut glare, then swivel up to 30 degrees left or right for a total 60-degree range. Swivel range may be reduced on larger or wider TVs in this size class. SITS JUST 2.6
INCHES OFF THE WALL: A low-profile design keeps the TV close to the wall for a clean look in bedrooms, kitchens, offices, dorms, and RVs, without the added depth of a pull-out arm you may not need on a smaller screen. MOUNTS TO WOOD OR METAL STUD, CONCRETE, BRICK, OR
BLOCK: Single-stud installation keeps the process simple; use hardware appropriate to your wall type. Not intended for drywall alone without anchoring into a stud or masonry behind it. EVERYTHING YOU NEED IS IN THE BOX: VESA bracket, wall plate, all mounting hardware, and clear instructions make this a one-person install. Once the wall plate is on the wall, lift your TV on or off anytime without touching the wall hardware again