Replacement Remote Control for TempurPedic Ergo/Ergo Extend Adjustable Bed Compatible with Adjustable Bed Base JDLK.33.01.18 JLDK.33.01.36 RF502A RF358A Remote (with Backlight)

Compatible with Tempur-Pedic Ergo or Ergo Extend Adjustable bed base JDLK. 33.01. 18 RF358A, JLDK. 33.01. 36, RF502A (With backlight).
Step 1: Please make sure your base remote has fresh batteries.
Step 2: Locate the Battery Backup Box and press the POWER DOWN button twice. A light on the Battery Backup Box will illuminate.
Step 3: On the back of the remote, press and hold down the PAIR button. The PAIR button will illuminate blue and start flashing. When the PAIR button stops flashing, the illuminated light on the Battery Backup Box will go out.
Step 4: Release the PAIR button and test all remote functions.
NOTE: If pairing fails, please reset the controller box on the bed or deactivate child lock and then pair again.
Deactivate Child Lock: Press and hold FOOT UP and FOOT DOWN buttons together for approximately six (6) seconds. The remote backlight will flash twice. When the backlight goes away, the remote is no longer in Child Lock.
Advanced Infrared Technology: Strongest and stable signal by Infrared technology, long transmission distance, 0.2 s fast response; you can control your bed from multi-angle and without obstruction.
Easy to use: Easy to pair or set up. After inserting the battery (not included), simply follow the pairing steps until successful, and it will perfectly replace your original remote