Safe Charging: This pure sine wave inverter has the function of mains priority UPS, which can automatically charge the battery and stop when it is full. It automatically switches to battery-powered mode when there is no mains power, and the switching time is as low as 9 milliseconds. Aluminum alloy heat dissipation plate provides strong heat dissipation below 50 degrees Celsius. For your battery charging and power problems to solve worries
Excellent performance: Inverter output power up to 1500W, peak power up to 3000W, sine wave ultra-wide input voltage range and high precision output. The intelligent cooling fan will automatically start the fan to dissipate heat after the temperature reaches 45, effectively reducing energy consumption
Wide range of applications: In addition to sum pump backup battery, you can also use this power inverter for RV and other outdoor power supply. General electrical charging, such as mobile phones, computers, refrigerators, etc., as well as luminaire lighting can be easily achieved. The pump backup battery system is easy to install and operate
Nvifco 1500W Pure Sine Wave Inverter
Specifications
Rated Power 1500 Watt
Peak Power 3000 Watt
Input Voltage DC 12V
Output Voltage AC 110V
Output Waveform Pure Sine Wave
USB Port QC 3.0
Input Voltage Range 10 ~ 15.5V
Working Temperature -10/14 ~ 50/122
Over Voltage Protect LED Red light on, shut down
Over Load Protect LED Red light on, shut down
Short Circuit LED Red light on
Storage Temperature -30/-22~70/158
Wave Distortion THD <3% (Linear load)
Step 1
Connect the lead to AC after confirming that the power switch and charger switch are off
Step 2
Loosen the terminal retention knobs on the inverter, and then connect the battery leads to the inverter knob and tighten it
Step 3
Open the switch after connecting the inverter leads to the water pump, and it is ready to use
Maintain a routine for you and your family
It does not interfere with the daily life of you and your family, when the inverter works with the water pump.