SPYPOINT Flex-S Solar Cellular Trail Camera, Integrated Solar Panel, LTE Connectivity, 100-foot Flash/Detection Range, Internal Battery + 32GB Micro SD Card

Previous pageNext pageThe SPYPOINT FLEX-S reliably delivers rich photos and video with sound directly to the SPYPOINT app and features a solar panel with an integrated lithium battery that enables Instant Mode and on-demand requests. Rain or shine, keep your camera working by installing 8 AA batteries or a LIT-22 rechargeable lithium battery pack (NOT INCLUDED) as back up. With true dual-sim technology, the FLEX-S comes pre-loaded with two preactivated SIM cards that ensure cross-carrier coverage on all major cellular networks and continuous connectivity to the best coverage in the area. Set up is simple with mobile activation and on-camera buttons that allow you to format the microSD card (NOT INCLUDED) and take a test photo.
IMPORTANT: THE FLEX-S REQUIRES A BACK-UP POWER SOURCE (NOT INCLUDED) SUCH AS 8 AA NON-RECHARGEABLE LITHIUM BATTERIES OR A LIT-22 RECHARGEABLE LITHIUM BATTERY PACK.
INCLUDED: Installation Strap
REQUIRED AND NOT INCLUDED:
A Class 10 Ultra-high speed microSD Card up to 512 GB8 AA non-rechargeable lithium batteries or a LIT-22 rechargeable lithium battery pack
SPYPOINT offers the only free photo transmission plan for cellular trail cameras: you receive 100 FREE photos per camera when you sign up for the SPYPOINT app. To receive more photos, upgrade your transmission plan. To save 20% on plans, join the SPYPOINT INSIDER'S CLUB. To request HD photos or videos through the SPYPOINT app, the purchase of a Full-HD photo or video package is required.
TRIGGER SPEED: Automatically adapts to conditions to ensure the best pictureFLASH RANGE: 100 FTDETECTION RANGE: 100 FTPHOTO RESOLUTION: 36 MPVIDEO: 1080p with soundMODES: Photo, Video, Time-Lapse, Time-Lapse+NETWORK: Multi-network LTE-preloaded with 2 preactivated SIM cards to ensure cross-carrier coveragePOWER: Internal rechargeable lithium battery and integrated solar panel FOUR CAPTURE MODES: The FLEX-S offers four capture modes: Photo, Video, Time-Lapse, and Time-Lapse+. The Time-Lapse function takes photos at your preferred interval. The Time-Lapse+ function takes photos at your preferred interval and when the cameras detection sensor is triggered, perfect for monitoring large areas beyond the cameras detection range.
INSTANT MODE AND ON-DEMAND REQUESTS: The FLEX-S features Instant Mode, which allows users to change settings and request on-demand or high-definition photos and videos instantly via the SPYPOINT app.
RESPONSIVE TRIGGER: The responsive trigger optimizes the cameras settings to the exact conditions at the time of the photo to deliver the best quality image, every time.
CONSTANT CAPTURE TECHNOLOGY: the FLEX-S can send and capture simultaneously, so you wont miss a minute of action in the field.
GPS-ENABLED: The FLEX-S is GPS-enabled to work with the customizable maps feature of the SPYPOINT app.
While the camera is off, plug the 12Vdc connector (charging cable) to the camera. The status light will illuminate red while charging and turn off when fully charged. It is recommended to charge the battery fully (approximately 12 hours).
Create an account on SPYPOINT.com, download the SPYPOINT app, then log in and add your camera.
Screw in the antenna, then insert the memory card and external batteries (SOLD SEPARATELY).
Turn the camera on. Immediately hold down the format button until the FORMAT LED blinks green. Format is complete when LED stops blinking.
Press the TEST button to receive a photo.
Turn your camera off until youre ready to install it in field.
Choose a location where the solar panel will receive at least 4 hours of direct sunlight.
Use the installation strap (included) and select North or South facing orientation for best results.
Adjust the height of the camera, aiming for the subject's mid-body.
Avoid leaves, branches or tall grass in front of the camera as this can trigger motion detection resulting in blank photos.
My camera doesnt turn on.