Backup Parktronic System Car Auto Vehicle Reverse with 8 Parking Sensors kit Distance Detection LCD Distance Display Sound Warning

3: The product provides early warning of danger and reminds the driver through sounds, numbers, lights, etc.
4: 8 light bars are displayed on the display to show the location of obstacles.
5: The product has voice/buzzer/mute, 3 alarm sound modes, which can be switched between each other.
6: The sensor can be painted.



Install 8 distance detection sensors on your car for all-round detection, helping you park easily and prevent collisions!
Working principle of the product:
When the product is in operation, the sensor emits ultrasonic waves. When these waves encounter an obstacle, they are reflected back. The sensor then receives the reflected signal and transmits it to the control box. Through calculations, the control box determines the distance between the vehicle and the obstacle. It alerts the driver through visual displays and sounds, helping to avoid potential dangers. This product is a great assistant for safe driving!


Powerful chip

Product display working statusWhen reversing, 6 sensors are activated at the same time, 4 behind the car and 2 in front of the car, when encountering obstacles, it will alert the driver through sound, numbers and light bars, reminding the driver to avoid collision. In normal driving When the brake is applied, 4 sensors in front of the car will be activated to assist the driver to safely pass through the narrow passage. When you release the brake, the reversing sensors will work for about 15 seconds before stopping, helping you to pass obstacles smoothly.


Monitor




SoundPress the button quickly, the three alarm sounds can be switched to each other.


Installation: Installation:
Red cable - ACC+
Yellow cable - reversing light+
White cable - brake light+
Black cable - negative pole
We specialize in the production of reversing radar, so we know how to produce high-quality sensors, so that it can be waterproof and dustproof, without false alarms, and adapt to the working environment of the car.
Pre-Purchase Notes:
1: Installation
Height: Sensors must be installed at a height greater than 45cm/18in from the ground.
2:
Alignment: After installation, sensors must remain parallel to the ground. Tilting is not permitted.
3: Control
Box Placement: The control box must not be placed inside the car fuse box to avoid interference.
4: Color
Variation: Slight color differences may exist between sensors.
5: Operation
During Reversing: When reversing, 4 rear sensors and 2 front sensors (totaling 6 sensors) will activate for detection.


Sensors




WaterproofThe sensor is waterproof and is not afraid of high-pressure water guns


Detection DistanceDetection distancePower: DC9V~14V
Detection range of the sensor behind the car: 0.3M ~ 2.3M
Detection range of front sensor of car: 0.3M ~ 1.0M
Q: Why don't the E and F sensors work?

When reversing, obstacles in the center of the front of the car have no effect on reversing. After accumulating a lot of customer feedback, we have optimized the product. When reversing, the sensors in the center of the front of the car (E and F) are not activated. This is a very good feature!
Legal Disclaimer

This product is designed as an **parking aid** and must be used with caution.
Users are solely responsible for:

1. Maintaining full awareness of their surroundings while operating the vehicle.

2. Complying with all applicable traffic laws and safety regulations.
The manufacturer disclaims all liability for any accidents, damages, or
losses arising from:
- Improper installation, misuse, or neglect of this device.
- Reliance on this product as a substitute for human judgment during driving.
Note:
Regular inspection of wiring connections (including ACC+, reverse light, brake light, and ground terminals) is required to ensure proper functionality.