16 Channels, St transmission --Supports multi groups of camera flashes Synchronization, 16 Channels, Maximum synchronous speed up to 1/250s in M mode, transmitting distance up to 30m.
Package Contents-- 4 in 1 Camera flash trigger kit including 1x flash transmitter(12V/23A lithium battery), 3x flash receiver, 3x sync c, 4x convert adapter, 1x clean cloth. If you have any questions, please reach us.
CT-16 4 in 1 Wireless Flash Trigger Kit, 433MHz 16 Channels Flash Transmitter+3pcs Receivers Set Compatible for Canon Nikon Pentax OlympusHOW TO DEAL WITH FOLLOWING SITUATIONS:
1. The flash trigger doesn't work?
Please check if the flash trigger is in bad contact with your camera (Some brands of models are not compatible). Reinstall, clamp hot shoe again. Please press the test button to check if it can trigger correctly. Please check it's instanlled the batteries or not.
2. The receiver can't receive the signal or have no response?
Please check it it's set up the same channel between the transmitter and receiver.
Please check if you take out the transparent plastic on the transmitter.
3. The photo had a black edge when I synced the flash?
This is because the flash is not fully synchronized to cause the black edge of the photo. Please check the setting of the channel.
4. This flash trigger is compatible with Canon, Sony, Nikon Camera?
Universial flash trigger, but please make sure your camera has the standard electrical contacts. Cold shoe camera is not compatible with this trigger.
It's only compatible with Sony cameras which have the MI hot shoe cameras.
5. Trigger won't synchronize with my flash lights?
CT16 flash trigger doesn't support TTL function. The package comes with 2 adapter ( 3.5 mm/ 6.35 mm) and sync c, it can compatible with the majority of studio flashes.
6. I only receivered transmitter or receiver?
Please reach us if you miss some accessories. We will help you deal with the problem.
Universial Compatible with Electrical Contact HotshoeNot Compatible with Canon EOS Rebel SL3/2500D, rEBEL t7/1500D/2000D/Rebel T100/3000D/4000D.
Compatible with Sony models which have the Mi hot shoe (this brand use the special hot shoe)
Package included:
1* flash transmitter
3* flash receiver
3*Sync c
3*Convert adapter
1*Clean cloth
Specification:
Transmit Frequency: 433MHz
Channel: 16 Channels
Transmitter Power: 12V /23A lithium battery
Receiver Power: 2 x 1.5V AAA Battery (Not included)
-Outdoor Operation Distance: max. 30m / 90feet (Open area, Unblocked signal)
Indoor operation distance: max. 25m / 75feet
Synchronous speed: Max. 1/250s
Sync c jack: Support 6.35 / 3.5 mm ports
Press the Test Button BeforePlease press the test button before use, the light on the receiver will flash when you press the button.