Network Cable Tester, Poe Cable Tester for CAT5e/CAT6/CAT6a, Ethernet Network Tester with NCV, NF-8209 Network Cable Tracker, Test Fault Distance Location and Length Measurement by TDR

Length measurementCable length testing accuracy of rj45 wire tr can be up to 98% and 200 m.
Cable continuity testing & NCVEthernet network tester can test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V).
Product Description

NF-8209 Network Cable Tester

NF-8209 Network Cable Tester has three modes for options to track cable like AC filter mode, analog mode and PoE mode. That means its equipped with the most powerful cable location technologies for any work environment. Also, it includes cable length measurement, cable faults testing, PoE testing, hub blink and NCV function.

NF-8209 Network Cable Tractor Main Function

POE Testing

identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard). Test CAT5e, CAT6, CAT6a (STP & UTP)

Port Flash

Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M Hub/switch.

TDR techonology Lenth Measurement

Use TDR techonology for cable length test. Cable length testing accuracy can be up to 97%. Please note testing range must be 10m-200m, otherwise it would display 0 meter.

Continuity Testing

CONT-Test open, short, cross, etc for STP, UTP cable. Detect AC voltage presence (50V-1000V)

Three Cable Scan Mode

Three scan modes selectable: Digital mode/ Analog mode/ PoE mode

Possible results on the line

If the LCD screen display "Cable Open", there are several reasons for this.

NF-8209 POE Tester Highlights

KOLSOL Network Cable Tester NF-8209 Transmitter

KOLSOL Network Cable Tester NF-8209 Receiver