RF N Male to N Male Cable 75FT, 50 Ohm Low Loss Cable KMR400 Coax Extension Cable for 3G/4G/5G/LTE/GPS/WiFi/RF/Ham/Radio to Antenna or Phone Signal Booster Use

Prevent Coming Off: Our coaxial cable adopt the clamp connector not the crimp type connector so the connector will not easy come off from the cable and all the connections are solid and professionally attached. We use the black heat shrink tube and lined adhesive by heat shrinking to connect the adapter and the coaxial cable. And the length is up to 2.2 in that is longer than others which would prevent the code coming off.
Compatibility: This ultra low-loss 400 n cable is designed to work with all devices and appliances with 50-Ohm impedance. Works for any 50 Ohm RF system. Such as an antenna and amplifier, and they can be used inside building or outside buildings. It enables perfectly secure connections between an amplifier to both indoor or outdoor antennae, taps, splitters.
Professionally Made: XRDS -RF is a professional manufacturer in producing coax cable. This low loss antenna cable is swept with network analyzers to assure the vswr of the cable less than 1.15. XRDS -RF is committed to improving the lives of our customers, and this cable will give you unmatched product quality. All of our items come with a full year of warranty.
Product Description

High-quality Material KMR400 Low Loss Coaxial Cables with N-Male to N-Male connectors -75FT ( 22.86 m)

The material of N male connector is brass copper, nickel plated body and Teflon (PTFE) insulator.

N male Coax adapter attenuates signal only 0.1 dB.

The inner conductor of our n type coax cable is copper clad aluminum that allows transfer of signals over large distances with minimum signal loss.

The out conductor is made of dense tinned copper and aluminum foil so it is very efficient and causes very low signal loss.

It is Ultra Low-Loss Coax Cable that means it incurs a very low loss.

This XRDS -RF 75ft KMR400 Coax with N-Male to N-Male connectors is designed to work with devices and appliances with 50-Ohm impedance.

Works for any 50 Ohm RF system, including cell phone boosters and WiFi repeaters.

This KMR 400 cable could be used inside building or outside buildings. It enables perfectly secure connections between an amplifier to both indoor or outdoor antennae, taps, splitters.

And the cable can be used to connects Antennas, Receivers, Meters and Radio transmitters and supports better signal retention for HF/VHF/UHF and higher frequency use, which is ensured to help increase your antenna's or amplifier's coverage, giving you enhanced call quality and superior data connectivity.

If you want to have more choices in the n male to n male cable, please see the Standard Comparison Chart below.