Skip to main content
  • $76.99
  • Free 30-day Returns
  • Price alert
    Shop it at NeweggBusiness.

    USB Tester, PD/QC, USB-C E-Marker Reader, 28V 7A, USB-A/C | PD2.0/3.0 & QC2.0/3.0, Voltage/Current/Power Monitoring, Real-Time Graphs, Capacity, Ripple, PD Trigger (NO APP/PC Software)

    • LCD Display USB TesterFNIRSI FNB58 has a 2.0-inch TFT LCD display, integrated USB-A, Micro-USB, Type-C interface. It is a USB voltage andcurrent detection meter and a mobile communication terminal fast charging trigger with gravity sensor
    • Multifunction USB Digital TesterFNB58 uses external 16-bit ADC, PD protocol physical chip. FNB58 USB tester can monitor the voltage, current, power, resistance, capacity, D+/D- voltage etc, it can be used to test the fast charging protocol of chargers
    • Fast Charge Protocol Trigger DetectionFNB58 supports QC2.0/QC3.0, FCP/SCP, AFC, PD2.0/3.0, VOOC/WARP, Super VOOC 1.0/2.0 trigger. The above protocols all support automatic monitoring. MTK-PE automatic detection. Support QC2.O->PD2.0 protocol conversion
    • Parameter RecordingThe highest six-digit display of voltage, current and power. 10 sets of switchable capacity, power etc. Support low-speed waveform drawing, 2 sps-100 sps sampling rate. Support high-speed ripple drawing, up to 4 M sps sampling rate
    • USB tester detection functionThe resistance measurement of the wire by the differential pressure method. E-Marker Cable chip reading. DASH Cable data reading. Record of startup time. Onboard temperature measurement. PD monitor. Analog DASH cable
    • NoteTo support environmental protection and reduce paper use, the FNB58 does not include a printed manual. You can access the manual, firmware updates, and app information via the QR code provided in the packaging
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    01

    • FNB58 USB tester has a 2.0-inch full-color ultra-wide viewing angle TFT LCD display, integrated USB-A, Micro-USB, Type-C interface.
    • FNB58 uses external 16-bit ADC, PD protocol physical chip, it can be used to test the fast charging protocol of chargers.
    • FNB58 can be used to measure the power supply or power consumption of products such as USB interfaces, mobile phone chargers, and U disks.
    • FNB58 can be used to measure the charging power of mobile phones and the input and output of mobile power supplies.

    Four Functional Curve Display

    02

    Real-time voltage and current curve

    View the change of the charging curve in real time, find the abnormal charging immediately.

    02

    Offline curve recording

    Supports up to 9 hours of offline voltage and current curve recording, charging process fully displayed.

    03

    D+/D- voltage curve

    Charging protocols Changes. Master in real time.

    04

    High-speed power ripple measurement

    Charger ripple measurement, easy to screen inferior chargers.

    Cable Detection Just Use FNB58

    05

    PD E-Marker Cable Detection

    Read data information of CC line with E-Marker chip

    06

    DASH Cable Detection

    Read DASH cable chip related data

    07

    Cable Interal Resistance Measurement

    Constant current load two-step fast measurement of wire resistance

    10
    03
    https://m.media-amazon.com/images/S/aplus-media-library-service-media/027cbd05-45f5-4ca0-8e54-407077e983b7.__AC_SR150,300___.jpg
    FNB58 USB tester
    https://m.media-amazon.com/images/S/aplus-media-library-service-media/2fb6524e-2321-475b-b202-e58a2234c667.__AC_SR150,300___.jpg
    FNB58 Standard USB tester
    https://m.media-amazon.com/images/S/aplus-media-library-service-media/5c8ffa0d-75cb-44f2-b866-c9b003f9ab39.__AC_SR150,300___.jpg
    FNB48P USB tester
    https://m.media-amazon.com/images/S/aplus-media-library-service-media/c389f5a5-292a-4a67-916d-921dd61e75ae.__AC_SR150,300___.jpg
    DMT-99 Multimeter
    https://m.media-amazon.com/images/S/aplus-media-library-service-media/2f4e0787-99a9-4157-a127-9695c67aaf6e.__AC_SR150,300___.jpg
    DMC-100 Clamp Meter
    Customer Reviews —————
    Price —————
    APP software ? NO ? NO V
    USB power delivery 3.1/Xiaomi magic change PD ? ? NO NO NO
    QC4, QC4+\ QC5, Huawei 66W/240W ? ? NO NO NO
    Simulation switch: protocol conversion PC-PD simulation isolation is not damaged ? ? NO NO NO
    Monitoring voltage/current/power 4~28V/7A/140W 4~28V/7A/140W 4~24V/6.5A/156W Non-USB tester Non-USB tester
    High -speed chain display 50K -> 4M Sa/s 50K -> 4M Sa/s 50K -> 3.2M Sa/s Non-USB tester Non-USB tester
    High -speed ripple bandwidth 400KHz 400KHz 320KHz Non-USB tester Non-USB tester
    Multimeter Counts No Multimeter No Multimeter No Multimeter 9,999 TRMS 9,999 TRMS
    AC/DC Voltage No Multimeter No Multimeter No Multimeter AC: 750V /DC: 999.9V AC: 750V /DC: 999.9V
    AC/DC Current No Multimeter No Multimeter No Multimeter AC/DC:9999uA-9.999A AC/DC:9999uA-9.999A
    01

    • FNB58 USB tester has a 2.0-inch full-color ultra-wide viewing angle TFT LCD display, integrated USB-A, Micro-USB, Type-C interface.
    • FNB58 uses external 16-bit ADC, PD protocol physical chip, it can be used to test the fast charging protocol of chargers.
    • FNB58 can be used to measure the power supply or power consumption of products such as USB interfaces, mobile phone chargers, and U disks.
    • FNB58 can be used to measure the charging power of mobile phones and the input and output of mobile power supplies.

    Four Functional Curve Display

    02

    Real-time voltage and current curve

    View the change of the charging curve in real time, find the abnormal charging immediately.

    02

    Offline curve recording

    Supports up to 9 hours of offline voltage and current curve recording, charging process fully displayed.

    03

    D+/D- voltage curve

    Charging protocols Changes. Master in real time.

    04

    High-speed power ripple measurement

    Charger ripple measurement, easy to screen inferior chargers.

    Cable Detection Just Use FNB58

    05

    PD E-Marker Cable Detection

    Read data information of CC line with E-Marker chip

    06

    DASH Cable Detection

    Read DASH cable chip related data

    07

    Cable Interal Resistance Measurement

    Constant current load two-step fast measurement of wire resistance

    10
    03
    https://m.media-amazon.com/images/S/aplus-media-library-service-media/027cbd05-45f5-4ca0-8e54-407077e983b7.__AC_SR150,300___.jpg
    FNB58 USB tester
    https://m.media-amazon.com/images/S/aplus-media-library-service-media/2fb6524e-2321-475b-b202-e58a2234c667.__AC_SR150,300___.jpg
    FNB58 Standard USB tester
    https://m.media-amazon.com/images/S/aplus-media-library-service-media/5c8ffa0d-75cb-44f2-b866-c9b003f9ab39.__AC_SR150,300___.jpg
    FNB48P USB tester
    https://m.media-amazon.com/images/S/aplus-media-library-service-media/c389f5a5-292a-4a67-916d-921dd61e75ae.__AC_SR150,300___.jpg
    DMT-99 Multimeter
    https://m.media-amazon.com/images/S/aplus-media-library-service-media/2f4e0787-99a9-4157-a127-9695c67aaf6e.__AC_SR150,300___.jpg
    DMC-100 Clamp Meter
    Customer Reviews —————
    Price —————
    APP software ? NO ? NO V
    USB power delivery 3.1/Xiaomi magic change PD ? ? NO NO NO
    QC4, QC4+\ QC5, Huawei 66W/240W ? ? NO NO NO
    Simulation switch: protocol conversion PC-PD simulation isolation is not damaged ? ? NO NO NO
    Monitoring voltage/current/power 4~28V/7A/140W 4~28V/7A/140W 4~24V/6.5A/156W Non-USB tester Non-USB tester
    High -speed chain display 50K -> 4M Sa/s 50K -> 4M Sa/s 50K -> 3.2M Sa/s Non-USB tester Non-USB tester
    High -speed ripple bandwidth 400KHz 400KHz 320KHz Non-USB tester Non-USB tester
    Multimeter Counts No Multimeter No Multimeter No Multimeter 9,999 TRMS 9,999 TRMS
    AC/DC Voltage No Multimeter No Multimeter No Multimeter AC: 750V /DC: 999.9V AC: 750V /DC: 999.9V
    AC/DC Current No Multimeter No Multimeter No Multimeter AC/DC:9999uA-9.999A AC/DC:9999uA-9.999A

    FNB58 USB tester is a reliability and safety USB voltage andcurrent detection meter and a mobile communication terminal fast chargingtrigger.

    It has a 2.0-inch full-color ultra-wide viewing angle TFT LCD display, integrated USB-A, Micro-USB, Type-C interface.

    Use external 16-bit ADC, PD protocol physical chip.

    It can be used to measure the power supply or power consumption of products such as USB interfaces, mobile phone chargers, and U disks.

    It can be used to measure the charging power of mobile phones and the input and output of mobile power supplies.

    It can be used to test the fast charging protocol of chargers.

    This instruction manual includes relevant safety information, warningtips and solutions to common abnormal situations.

    Please read the relevantcontent carefully and strictly abide by all warnings and precautions.

    Do not connect the monitoring interface to a power supply exceeding 28V.

    Do not connect the PC connection port to a power source exceeding 16v.

    Only one pair of monitoring interfaces (one input port,one outputport) can work at the same time. When there is a pair of monitoring interfaces working, it is forbidden to connect to the equipment onother monitoring interfaces. (Except the PC connection port, the PC port can be connected to an external power supply).

    When using the fast charge trigger module,please do not connect equipment that cannot withstand high voltage to any monitoring interface.

    After using the PD trigger/monitor/conversion/read E-Marker cablefunction, please turn the PD communication switch in the lower rightcorner back to the OFF position.

    Do not charge the phone after the fast charge is triggered.

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    Manufacturer Contact Info

    LOADING...