OBD2 to USB C Power Cable for Dash Cam,OBD Adapter Hardwire Kit Tpye-c with Low Voltage Protection(Auto-Cutoff 11.6V/23.4V), 24/7 Parking Mode,ACC Detection,Plus & Play Constant Power Cable (11.5FT)

Smart Dual Modes with
Selector Switch: Mode
0: ACC Mode. The Type-C dash cam hardwire kit automatically switches off 20 minutes after the engine stops (in certain cases 20-30 minutes or longer, depending on the vehicle's OBD system logic), preventing battery drain and achieving a perfect balance between convenience and vehicle safety.
Mode -: 24/7 Parking Surveillance. When your vehicle is off, the dash cam power cord supplies continuous power. It disconnects power 5 minutes after detecting a low battery voltage ( 11.6V for 12V or 23.4V for 24V vehicles), enabling round-the-clock anti-theft monitoring while safeguarding your battery. Low Voltage Protection 11.6V / 23.4V
Auto-Cutoff: This ACC hardwire kit avoids a dead battery by automatically cutting power at 11.6V (12V vehicles) or 23.4V (24V vehicles). This essential feature prevents total discharge while maintaining sufficient charge for a reliable start, even after extended parking.
Stable 5V/3A Power Output: The hardwire kit for dash cameras eliminates restarts and video lag, protects the mainboard from ignition surges, and records post-parking incidents (scratches, collisions) with a 5-minute delay-off, helping to ensure 24-hour evidence recording.
6-in-1 Circuit Protection System: The ACC detection hardwire kit incorporates six key safeguardsLow Voltage Cut-off, Anti-Drain Protection, Over-Current, Short-Circuit, Reverse Polarity, and Overheat Protectionto reliably protect both your dash cam and your vehicle's electronics. Direct OBD Power & Data Safety: The hardwire charger draws power directly from your OBD2 port, freeing up your 12V socket. It supports continuous recording with automatic shut-off, all while drawing only power and ensuring complete data isolation from your vehicle's ECU.
Universal Compatibility: This 3.5 -meter ( 11.5 -ft) OBD extension 24-hour parking monitoring cable is suitable for 12V/24V vehicles, including cars, SUVs, trucks, and big rigs, and works with nearly all Type-C dash cams. It is designed for A5-B5 pin definition and is NOT compatible with A8-B8 pins or 12V input