Backup/Front/Side View Camera: No Distortion Effect Starlight Night Vision HD Metal Flush or Surface Mount 720P AHD and TVI Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans

This flush mount backup camera incorporates a modern 6-piece full-glass large-aperture optical system, providing images with minimal distortion for a sharp, realistic view while reversing. It is fitted with a horizontal 135-degree wide-view angle lens, ideal for clearly monitoring hidden blind spots and making parking secure and straightforward. You need not be concerned about water, fog, or condensation inside.
Note: Please order a suitable harness separately to finish installation if connecting to a factory radio. This reverse camera flush mount supports 3 video signal output formats: CVBS, AHD, and TVI (suitable for Android stereos). CVBS is the default. Cut the purple wire loop to select AHD format video signal (AHD, 720P, 30fps), and cut the blue wire loop to select TVI format video signal (TVI, 720P, 30fps). It offers starlight-level night vision ( 0.005 Lux, superb low-light performance), allowing you to park with assurance at night, on rainy days, or in dim garages. The car backup camera's housing is metal, featuring a 2-in-1 installation option design (surface or flush mount). It also includes 4 built-in multifunctional switching wire loops: cut the white loop for front view, cut the green loop to remove the guidelines, and cut the purple and blue wire loops to separately choose AHD and TVI format video signal output.
Note: Based on experience, some inexpensive or older Android stereos may have AHD or TVI format video signal input settings, but they might not function because the internal hardware does not support it. In such cases, please use the default CVBS video signal output (do not cut the purple or blue wire loop, otherwise you may get a black and white screen). This flush mount backup car camera is not compatible with suction-type dash cams, mirror dash cams, and inexpensive CarPlay devices, as these devices have different connectors (lacking an RCA female connector) or internal PIN definitions, even if some have the same size 4-pin connector. If connecting this flush mount backup car camera to a GPS navigator, please separately order an additional adapter with an RCA to 2.5 mm connector to complete installation. Cut the purple wire loop to choose AHD format video signal output for the Dynavin 9 Premium D9 and selected ATOTO stereos (F7 Series, S8 series, and A6 KarLink version). It will not work on the ATOTO A6Y Series Android stereo or SA102 Starter. Cut the blue wire loop to display the HD image in true 720P HD on compatible
Kenwood receivers: DNR1007XR, DNR1008RVS, DMX1057XR, DMX1037S, DNX997XR, DDX9907XR, and DMX958XR