New RF399A RF368B Sealy Ease 2.0/3.0/4.0 Replacement Remote Control Compatible with Tempurpedic/Ergo Adjustable Bed Base JLDK.30.03.20

Important Tips: If the remote control does not operate, please
verify the following: 1) Confirm the batteries are inserted correctly and do not require replacement. 2) Confirm the remote's child lock is not engaged (different models have different deactivation methods). 3) Disconnect the device from power for one minute, then reconnect it before attempting to use. This new RF399A RF368B replacement remote control is compatible with the Sealy Ease 2.0, Sealy Ease 3.0, Sealy Ease 4.0, and the Tempurpedic/Ergo Adjustable Bed Base JLDK. 30.03. 20.
How To Pair: 1. Find the battery backup box and press its button TWICE. A light on the battery backup box will turn on. 2. Take off the back cover of the remote, then press and hold the PAIR button. The PAIR button will light up blue and begin flashing. Once the PAIR button ceases flashing, the illuminated light on the battery backup box will turn off. Release the PAIR button. The remote is now paired to the adjustable base.
Pair Methods: 1. Remove the rear cover of the remote control by sliding it down to reveal the PAIR button. Unplug the Power Cord from your electrical outlet. Wait for 1 minute, then plug it back in. Carry out Step 2 within 10 seconds, while the control box light is flashing. 2. Press and hold the PAIR button located on the back of the remote. The PAIR button will illuminate and start to flash. When the PAIR button stops flashing, the LED light on the control box will also stop flashing. Release the PAIR button.
High Performance: Featuring newly upgraded smart chips, this adjustable bed base replacement remote provides effective long-distance transmission, enabling precise control from up to 8 meters (26 feet). The fastest response time is under 0.2 seconds, and it supports over 160, 000 clicks according to approved tests