DashCam Power Adapter,(10P TypeB) Compatible with Select Toyota and Lexus | for Toyota (Corolla, Highlander, RAV4, Tacoma, Tundra, 4Runner) and Lexus (IS, ES, RX, NX, LS) with Auto-Dimming Mirror

Clean Plug-and-Play Installation Powers Only When Vehicle Is On This plug-and-play adapter provides neat power for your dashcam or GPS mirror camera. Simply insert it into the auto-dimming rearview mirror power socket and link your device via USB for a tidy setup without loose cables.
Note: It supplies power only when the vehicle is ON (ACC mode) and does not provide constant power or support parking-mode recording. Please verify your intended use before buying. Compatible with select Toyota models (Corolla, Highlander, RAV4, Tacoma, Tundra, 4Runner) and Lexus models (IS, ES, RX, NX, LS) that come with a factory auto-dimming mirror and a concealed 10-pin Type B connector. Even if the connector appears identical, the wiring could differ. Please check both the vehicle year and connector type to prevent ordering an incorrect part. This product is not designed for use with digital or flip-to-dim mirrors. This product is compatible ONLY with 10-Pin Type B connectors. Certain vehicle models, such as the Toyota RAV4, Highlander, Sienna, Corolla, and Subaru Outback, may feature either a 10-pin Type B or a 12-pin Type C connector, depending on the vehicle trim and options. Please inspect your rearview mirror connector BEFORE ordering by counting the pins to confirm it is a 10-pin connector. Do NOT depend solely on the vehicle model or year for compatibility.

The concealed Type B 10-pin power port is located behind the auto-dimming rearview mirror or inside the overhead console. Detach the small trim cover on the mirror base or console to access it; confirm the location before installation. This integrated USB adapter transforms this port into a USB power source for your GPS unit, dashcam, radar detector, mirror camera, car charger, or any other USB device, enabling a neat and hidden installation. This adapter is compatible solely with auto-dimming rearview mirrors that have a Type B 10-pin power connector. Confirm your mirror type and connector before purchase. Other 10-pin connectors (such as Type E, Type H, etc. ) may look similar but possess different pin layouts and power configurations. This adapter supports Type B connectors exclusivelydo not rely on the connector's physical appearance alone for compatibility. This adapter contains two 5 V / 2 A USB ports, but includes only one step-down (buck) module. To power both USB ports at the same time, an additional module must be bought separately. Each buck module is subjected to a 48-hour, 5 V / 2 A load test for dependable and secure performance