Upgrade 24V 41.6A 1000W DC Switching Power Supply, Universal Transformers PSU AC110V/220V (SMPS), Upgraded Output Port with Power Cord, 24 Volt Power Supply for 3D Printer, CCTV, DC Motor

AC/DC 24V Power Supply1. 24V 41.6A 1000W Power Supply.
Input: AC 110/220V;
Output: Default DC 24V,
Adjustable range: ±10%, Adjustable voltage range is 21.6V - 26.4V, which greatly broadens its application scope and can deliver up to 800 watts of maximum power with an efficiency of up to 80%. When connecting equipment with high peak variations, such as motors, please choose a power supply at least 2 times greater than the rated power of the equipment to ensure safety. AC/DC 24V Power Supply2. 24 volt power supply, Three output channels are available to power multiple load devices. The power supply has upgraded its output port, added a power port and power cord, installation bracket + connection terminal accessory package, removing the hassle of having to match a separate power cord and making the connection easier and quicker. Good Heat DissipationThe power transformer is made of porous metal aluminum material, low noise and good and steady heat dissipation. The 1000W power supply with intelligent temperature control fan, only when a certain operating temperature is reached will the fan run, in order to prevent the converter from overheating and failure; the operating temperature range of this switching power supply: 14°F-140°F. Multiple Protections24 Volt 41.6A 1000W DC power supply is strictly tested before leaving the factory, smart chip provides overload auto power off/over voltage auto power off/over heat auto power off/short circuit protection, 110V to 24V converter is RoHS/CE/LVD/EMC safety certified; lead-free process, meets the environmental protection RoHS requirements; provides effective protection for your power safety. Input Voltage 115V/230VThere is a voltage switch on the side of the 24V DC transformer, set to 115V for American customers at the factory. Before using, please check whether the input voltage is 115V, and switch to the local country's voltage to use; to avoid voltage mismatch damage to the power supply equipment. Wide ApplicationsThe unit converts AC mains power to low voltage DC 24V with a peak power of 41.6A 1000W, which works perfectly with most 24V devices under 1000 watts, such as LED strips, 3D printers, ham radios and more. The LED power supply will automatically output 0~ 33.3A to match your device, the actual current depends on the load, such as 5A (120W), 10A (240W), 15A (360W), 20A (480W), 25A (600W), 33.3A (800W).

Please make sure your load device matches the 24V supply voltage and the current is less than 41.6A. Do not overload it and do not use it as a charger; it is just a voltage converter