New Backlight V5 Pro Voice Remote Control, Compatible with vSeeBox V1/V2,V5/V1/V2/V3 Pro,V3 Plus,V1 Max,Elite,Max Intelligent Bluetooth Voice Remote Control

[Wide Compatibility] The V5 Pro Backlit Voice Remote is compatible with vSeeBox models, applicable to V5 Pro/V3 Pro/V3 Plus/V1/V1 Pro/V2/V2 Pro/V1 Max/Elite/Max. Made from ABS plastic and silicone, this V5 remote offers exceptional comfort and durability. Utilizing infrared technology, it delivers extended transmission range (over 40 feet), rapid response time (as fast as 0.2 seconds), and key durability tested for over 120, 000 clicks. [Quick Pairing] Simultaneously press and hold the OK and Vol- buttons (approximately five seconds) until the remote's indicator light flashes continuously, indicating Bluetooth is enabled on the V5 Pro remote.

Navigate to System Settings - Bluetooth - Pair New Device, locate the remote, and connect to the device. If pairing fails, please remove the old device from the system first, then follow the steps again. This voice remote features V3 and V2 operating modes. Press and hold the number 5 button for over ten seconds to switch modes.
(Default mode: V3) [Premium Features] The V5 Pro Voice Remote Control features illuminated buttons. When buttons are hard to see at night, touch any button to activate the backlight for easier visibility. Its voice control is exceptionally convenientuse voice commands to switch channels, adjust volume, or search for movies.
(Note: Voice control is not supported on some models. ) [Programming Instructions] 1. Press and hold the Power button for 5 seconds until the LED stays lit; 2. Press the button within the V5 remote control area to program; 3. Align the V5 remote control face-to-face with the remote, then press the button. If programming succeeds, the LED will flash 3 times; 4. Repeat steps 2-3 to program the remaining buttons; 5. Press any other button to exit learning mode; the LED turns off