Replacement Remote Control for Sealy Ease 2.0/3.0/4.0 RF399A RF368B Compatible with Tempurpedic/Ergo Adjustable Bed Base JLDK.30.03.20 Easy Pairing

Important Tips: If the remote control does not work, please
check the following: 1) Ensure the batteries are installed correctly and do not need replacement. 2) Ensure the remote's child lock is not activated (different models have different methods to deactivate it). 3) Disconnect the device from power for one minute, then reconnect it before attempting operation. CompatibilityNew RF399A RF368B Sealy Ease 2.0 / 3.0 / 4.0 Replacement Remote Control Compatible with Tempurpedic/Ergo Adjustable Bed Base JLDK. 30.03. 20. How To Pair Locate the battery backup box and press the button TWICE. A light on the battery backup box will illuminate. Remove the back cover of the remote, press and hold down the PAIR button. The PAIR button will illuminate blue and start flashing. When the PAIR button stops flashing, the illuminated light on the battery backup box will go out. Release the PAIR button. The remote is now paired to the adjustable base. Pair Methods Remove the rear cover of the remote control by sliding it down to expose the PAIR button. Unplug the Power Cord from your power outlet. Wait 1 minute, then plug it back. Perform Step 2 within 10 seconds, while the control box light is flashing.

Press and hold the PAIR button on the back of the remote. The PAIR button will illuminate and start to flash. When the PAIR button stops flashing, the LED light on the control box will stop flashing. Release the PAIR button. High PerformanceWith the newly upgraded smart chips, our adjustable bed base replacement remote has good transmission over long distances, precisely controlling from as far as 8 meters/26 feet. The fastest response takes less than 0.2 seconds to your device, and it supports over 160, 000 clicks via approved tests