Replacement Remote Control for Tempurpedic Ergo Advanced Adjustable Bed, Models Rc-wm-101, Easy to Pair

Perfect Compatibility & ReplacementReplacement remote control compatible with Tempurpedic Ergo Advanced Rc-wm-101 adjustable bed. (Please make sure your old remote control matches the picture exactly before ordering, otherwise it may not work. ) Pairing Method Place batteries into the remote control (3 x AAA batteries). Ensure the power base is plugged into a functioning outlet. Press and hold the pairing button on the control box until the indication light blinks. Press any button on the remote control. When the control box light turns solid, the remote should be successfully paired. Test and verify the remote is correctly paired by activating functions of the power base.

You have now completed the pairing process. Pairing Method Place batteries into the remote control (3 x AAA batteries). Ensure the bed is plugged into a functioning outlet. Press the learn button for 3 seconds.
Figure 1: Press "Learn Button" to initiate the RF learning Mode.
(Tips: If a new signal is not received, it will reset itself to normal mode in 10 seconds. ) When the Green LED signature light illuminates, the RF frequency code setting function will be activated. Press any button on the remote control. When the receiver light flashes, you have completed the learning process of the RF frequency code.
Figure 2: A flashing Green LED indicates the control box has received the remote control signal. NoteIf the old remote control has not been unpaired, the new remote control cannot be paired directly. Once the new remote control has been paired twice, the old remote control will automatically become unpaired. Therefore, if the initial pairing attempt is unsuccessful, please try multiple times; this will force the disconnection of the old remote control, allowing the new remote control to pair successfully