





Any questions? Our AI beta will help you find out quickly.
TV Mantel Mount: A height-adjustable pull-down TV mount specifically designed for mounting large TVs over a fireplace mantel. It provides 29 inches of total height adjustment, enabling the TV to be pulled down to a more comfortable viewing level. All required hardware and setup instructions are included for secure installation above your chimney mantel. Dynamic Gas Spring Height Adjustment: An advanced gas spring mechanism aids in lifting and lowering the TV. The mount allows for smooth, tool-free pull-down height adjustment using a padded, insulated handle. Spring tension must be adjusted prior to initial use to match your TV's weight. Find the Perfect Angle: With full-motion capabilities, including 29" of total height adjustment, a tilt range from +10 to -5 degrees, and a +/-30 degree swivel left and right, you have the versatility to find your ideal viewing angle and minimize glare. The leveling feature permits micro-adjustments after installation for perfect horizontal alignment. Universal Fit: This mantel mount accommodates TVs with screen sizes of 65, 70, 75, 80, 85, and 90 inches, depending on VESA pattern and TV weight (minimum 75 lbs, maximum 110 lbs). It is compatible with VESA hole patterns: 100x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x500, and 800x500. Please verify your TV has a compatible VESA pattern and weighs at least 75 lbs, regardless of its screen size, to ensure a proper fit. Pre-Purchase Checklist and Cautions: Please note, this wall mount requires solid concrete or wood studs for installation and is not suitable for stone or marble surfaces. The maximum allowable mantel depth is 16". When fully raised, the mount arm may extend up to 37" over the top of the mantel. Ensure sufficient vertical distance is available between the mantel and the ceiling, particularly for larger TVs. The temperature at the front of the fireplace mantel must not exceed 100°F (38°C). For smaller TVs and TVs with lower VESA mounting holes, a portion of the wall mount might be visible under the TV when it is raised. This is not a low-profile TV mount due to its extensive height adjustment and extension capabilities. The TV mount sits a minimum of 5.7" away from the wall. This mount is engineered for TVs weighing 75110 lbs; TVs under 75 lbs may not lower the arm properly. Gas spring tension adjustment is required before first use