Mount-It! VESA Mount Adapter Kit, 200x200mm to 300x300mm & 400x400mm

UPGRADE YOUR TV WITHOUT REPLACING YOUR MOUNT Just bought a bigger TV but don' t want to buy a whole new wall or ceiling mount? This adapter kit expands your existing 200x200mm VESA mount to accept the larger hole pattern on your new TV, so you can keep the mount you already have installed in your living room, bedroom, or home office.
MATCH YOUR VESA PATTERN, NOT YOUR SCREEN SIZE Fit depends on hole spacing, not screen size. This kit works when your existing mount plate is 200x200mm and your TV' s VESA pattern is 300x300mm or 400x400mm (symmetric patterns only). Measure both before ordering TVs with a 400x200mm or other asymmetric pattern are not compatible with this kit.
STEEL YOU CAN TRUST Built from heavy-gauge steel with a 66 lb load capacity. Your final weight limit is set by whichever is lower: this adapter' s rating or your existing mount' s rated capacity, so check your mount' s spec before mounting a heavier TV.
EVERYTHING TO ATTACH YOUR TV Includes M6x30 and M8x30 bolts (4 each) plus 4 spacers sized for most 300x300mm and 400x400mm TVs, so you can connect your new TV directly to the adapter arms.
EVERYTHING TO ATTACH YOUR EXISTING MOUNT Includes flat bolts and nylon lock nuts (4 each) to secure the adapter arms to your current 200x200mm mount plate. Some mount plates use 8 mounting points if yours does, pair the extra holes with hardware from your original mount for a fully secured fit.
STRAIGHTFORWARD INSTALL, NO GUESSWORK Attach the adapter arms to your existing mount plate, then connect your TV. Clear step-by-step instructions are included, and a Phillips screwdriver and adjustable wrench are the only tools you' ll need. Before mounting, check the back of your TV near the VESA holes for any raised ridges or recessed panels that could prevent a flush fit.
BACKED BY MOUNT-IT! Designed and supported by a US-based team, with a lifetime warranty on this adapter kit for lasting peace of mind on your setup.